Align T-Rex 600 Nitro V2 Limited w/Servos/Gyro/Battery

The Align T-REX 600N V2 includes recently styled performance upgrade components for a renewed look.

Features:

• New 600 sized programmable head assembly with 3 sets of positive and negative deltas, numerous Bell and Hiller mixing ratios available, along with various flybar ratio settings.
• The brand-new head assembly enable pilots to benefit from the head's higher control resolution in addition to stability level, pleasing the need of both highly stable fixed classifications in addition to precision aerobatic categories.
• Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque caused flex.
• Additional radial bearing is contributed to the top of the primary equipment center to make sure stable rotation, and remove jamming of one method bearing.
• Newly developed unibody stainless-steel tail drive equipment center install, for more precise tail drive equipment and higher tolerance.
• New high quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
• Brand brand-new tail transmission, with aesthetically pleasing material and improved maintenance.
• Utilizes high effective tail drive system.
• High speed ranked thrust bearing in tail blade grips.
• Highly effective lightened engine cooling fan, minimizing engine load and enhancing cooling efficiency.
• Large diameter clutch system with distinct setup technique for good balance, very little vibration, and reliable power transfer.
• Forward mounted rudder servo to secure it from exhaust contamination.
• mm tail blades for sharp rudder reaction and exceptional tail locking ability.
• Unique H cross section shaped electronic installing platform for easy electronic installing and protection.
• Large capability 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
• Starting and clutch supporting point uses 10mm one method bearing.
• All up prepared to fly dry weight is just 3200g (7lbs).
• Main fuel tank developed with fuel supply stabilization effect.
• Light weight highly agile flybar system.
• Impact resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
• Created with principles from big helicopter competitions, for the very best fixed and vibrant flight performance.

Users need to have a particular principle of security to run the R/C helicopters. Make sure to read and abide by associated safety notes of user's manual before flying.

This bundle consists of:
T-REX 600 Nitro V2 packages set
600D PRO Carbon fiber blade
(3) DS610 Digital servo
DS620 Digital servo
GP780 Head lock gyro combo
2 In 1 voltage regulator combo
RCE-G600 Guv

Requires:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Standard servo
Align 50 engine
50 Muffler
Pitch gauge
Super starter
Engine fuel
Fuel pump

Specifications:

Length: 1160mm
Height: 398mm
Main blade length: 600mm
Main rotor diameter: 1350mm
Tail rotor diameter: 240mm
Engine pinion equipment: 20T
Autorotation tail drive equipment: 180T
Drive equipment ratio: 8.5:1:4.5(E:M:T)
Flying weight: Approximate. 3200g
Color container: 72x25.7x12.5cm
Outer container: 74.5x52.5x39.5cm ,6sets/ctn