Align T-REX 600 Nitro V2 Kit

Functions:
1.New 600 sized programmable head assembly with 3 sets of favorable and unfavorable deltas, numerous Bell and Hiller mixing ratios offered, in addition to numerous flybar ratio settings.
2.The new head assembly enable pilots to gain from the head?s higher control resolution in addition to stability level, pleasing the requirement of both highly steady static classifications in addition to precision aerobatic classifications.
3.Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
4.Extra radial bearing is added to the top of the primary equipment center to make sure steady rotation, and get rid of jamming of one method bearing.
5.Freshly developed unibody stainless-steel tail drive equipment center install, for more precise tail drive equipment and higher tolerance.
6.New high quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal connectors, leading to improved rudder control precision.
7.Brand new tail gear box, with visually pleasing material and improved upkeep.
8.Utilizes high efficient tail drive system.
9.High speed rated thrust bearing in tail blade grips.
10.Highly efficient lightened engine cooling fan, decreasing engine load and improving cooling efficiency.
11.Large diameter clutch system with distinct setup approach for good balance, very little vibration, and efficient power transfer.
12.Forward installed rudder servo to secure it from exhaust contamination.
13.95mm tail blades for sharp rudder response and outstanding tail locking capability.
14.Unique H random sample shaped electronic installing platform for simple electronic installing and security.
15.Large capability 440CC fuel tank for approximately 10 minutes of severe 3D flights.
16.Starting and clutch supporting point uses 10mm one method bearing.
17.All up all set to fly dry weight is only 3200g (7lbs).
18.Main fuel tank developed with fuel supply stabilization result.
19.Lightweight highly nimble flybar system.
20.Effect resistant fiberglass canopy with 3 point hook installing system for ease of install/removal.
21.Designed with principles from big helicopter competitors, for the best static and vibrant flight performance.

Users should have a specific concept of security to operate the R/C helicopters.
Be sure to check out and adhere to related security notes of user's manual before flying.

Requirements:
Length:1160mm
Height:398mm
Main blade length:600mm
Main rotor diameter:1350mm
Tail rotor diameter:240mm
Engine pinion equipment:20T
Autorotation tail drive equipment:180T
Drive equipment ratio:8.5:1:4.5(E:M:T)
Flying weight:Approximate. 3200g
Color carton:72x25.7x12.5cm
Outer carton:74.5x52.5x39.5cm ,6sets/ctn

Devices:
T-REX 600 Nitro V2 sets setX1

Radio transmitter and electronic devices required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Basic servoX1
Align 50 engineX1
50 MufflerX1
600D PRO Carbon fiber bladeX1
DS610 Digital servoX3
DS620 Digital servoX1
GP780 Head lock gyro comboX1
2 In 1 voltage regulator comboX1
RCE-G600 GovernorX1
Pitch gaugeX1
Super starterX1
Engine fuelX1
Fuel pumpX1