Align T-REX 550E Pro DFC Super Combo W/730MX BL Motor 850KV 3GX

Brand new T-Rex 550E PRO DFC incorporates all new style aspects, focusing particularly on upgrading the power with a 700 class motor, the 730MX (850KV). With a size that fall in-between large and small designs, this brand new T-REX 550E PRO DFC features stability and dexterity, with remarkable power output that will ensured jaw dropping performance.

T-REX 550E PRO DFC is geared up with latest designs such as: DFC main rotor system, new 112T CNC helical main equipment, new style tail drive assembly, new style tail control system, etc. The most spoken about function is the freshly developed 730MX (850KV) motor, a motor normally found in 700 class helicopter but over specification for 550 class. Enthusiasts can plainly feel the remarkable increase in power and torque, while making the most of its greater performance, lower existing and temperature advantages. In addition, the freshly created 2mm thick 3K carbon side plates not just allows the installation of broader 730MX (850kv) motor, they likewise simplify the structure, while keeping high rigidity and simple maintenance.

The clean atheistic exterior, ergonomic style, and remarkable control feel; all are reasons for enthusiasts not to miss this worth loaded T-REX 550E PRO DFC!

Standard devices
?Castle Talon 90 Brushless ESC x 1
?730MX Brushless Motor(850KV) x 1
?DS615 Digital servo x 3
?DS655 Digital servo x 1
?3GX Flybarless System x 1

Requirements
?Length: 1160mm
?Height: 330mm
?Width: 110mm
?Main Blade Lenght: 550mm
?Main Rotor Diameter: 1248mm
?Tail Rotor Diameter: 254mm
?Motor Drive Gear: 16T
?Main Drive Gear: 112T
?Autorotation Tail Own Gear: 131T
?Tail Own Gear: 34T
?Own Gear Ratio: 1:7:3.85
?Weight(w/o power system): 2400g

Includes
?T-REX 550E PRO DFC Sets Set x 1 set
?550 3G Carbon Fiber Blades x 1 set
?90mm Carbon Fiber Tail Blade x 1 set
?730MX Brushless Motor(850KV) x 1
?DS615 Digital servo x 3
?DS655 Digital servo x 1
?Castle Talon 90 Brushless ESC x 1
?3GX Flybarless System X1 set

Radio transmitter and electronic devices required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 2600~5200mAh battery x 1