Align T-REX 550E DFC Super Combo Promotion battery

Direction(3GX Programmable Flybarless System):
Brand name brand-new upgraded 3GX represents a brand-new generation of multi function flybarless system. The considerably enhanced performance will create immediate effect on any enthusiasts.
3GX is presently the tiniest and lightest flybarless system on the marketplace. 2 ports to straight link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through an easy process. In addition, the 3GX can support all of the CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer setup software application directs the user through a step by step setup process, allowing for fast setups without leaving out any steps.
Support Bluetooth connection. With the soon to be released Bluetooth connection set, 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to reduce electronic wire clutters.
Custom specifications have been opened up in 3GX to allow pilots to tweak many settings for swashplate and rudder. Settings export function permits custom-made settings to be shared amongst friends.
3GX utilizes brand name brand-new gyroscope sensing units of the highest requirements when compared with other flybarless systems presently on the marketplace, allowing it to be used under extreme conditions. Double axis plus rudder sensing unit considerably enhances swashplate and rudder correction accuracy compared with last generation 3G. This is plainly noticeable in steady hover in addition to extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, radiance engine or electrical powered. The superior vibration resistant attribute is evident even when installed with more difficult double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The result is a remarkable stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns type of maneuvers are quickly achieved with accuracy.
3GX's rudder permits constant rudder feel even under high speed conditions. This outstanding control feel will allow pilot of all skill levels to experience the perfect combination between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position in addition to elevation, and even autonomous way point flights in addition to return home.

Specification(T-REX 550E DFC):
1.Equipped with the low CG DFC rotor head, successfully reduce wind resistance throughout flight, supplying the most direct and precise control feel back to the pilot, and exhibits exciting 3D performance and unimaginable flight speed.
2. Uses high spec MOD1 CNC helical main equipment to increase equipment mesh area, and lessen equipment noise throughout flight.
3.New light-weight rigid metal main shaft bearing blocks.
4.High quality brand-new tail gearbox style, integrated with brand-new dual point installed tail pitch control assembly to lessen slops and increase rudder control accuracy.
5.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control effectiveness.
6.New body mount to increase body rigidity and included gyro positioning place.
7. Freshly created rear installed rudder servo mount.
8.Equipped with MX series high effectiveness brushless motor.
9. New 2.0mm 3K carbon fiber side frame for basic yet rigid frame building, allowing for simple assembly and upkeep.
10.High speed rated thrust bearing in tail blade grips.
11.High effectiveness torque tube drive.
12.Integrated swash anti-rotation guide and gyro installing platform.
13.Freshly styled aerodynamically canopy for the supreme fit.
14.Equipped T-REX 600 class tail boom set, supporting with 600mm main blade and increase tail stability

Users must have a specific idea of security to run the R/C helicopters.
Be sure to check out and comply with related security notes of user's manual before flying.

Requirements(3GX Programmable Flybarless System):
Running Temperature Level:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces initial factory receiver)
Futaba S.BUS system support
Integrated in guv function
Optimum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognization

Requirements(T-REX 550E DFC):
Length: 1160mm
Height: 330mm
Main Blade Length: 520mm
Main Rotor Diameter: 1188mm
Tail Rotor Diameter: 254mm
Motor Drive Equipment:11T
Main Drive Equipment:112T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:10.18:3.85
Weight(With Motor): 1800g

Devices:
T-REX 550E DFC Kits Set X1
Castle Talon 90 Brushless ESC x1
520 Carbon fiber blades X1
DS615 Digital servoX3 set
DS655 Digital servo X1
3GX Flybarless System X1 set
600MX Brushless Motor X1
90mm 3K Carbon Fiber Tail Blades X1 Set
6S2P 22.2V 5200mAh/40C/A x 1

Radio transmitter and electronic devices needed for assembly:

Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 5200mAh
Dial Pitch Gauge or Digital Pitch Gauge