Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Set. This incredible package consists of not only the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have actually also been consisted of, offering you with an incredible helicopter package and an equally outstanding electronics package all in the very same box.
550E DFC Functions:
Geared up with the low CG DFC rotor head, successfully minimizes wind resistance throughout flight, offering the most direct and exact control feel back to the pilot, exibiting thrilling 3D efficiency and inconceivable flight speed.
High specification MOD1 CNC helical main gear increases gear mesh area, and minimizes gear sound throughout flight.
Light-weight stiff metal main shaft bearing blocks.
High quality tail gearbox style, combined with dual point mounted tail pitch control assembly to reduce slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control effectiveness.
Body mount boosts body rigidity and added gyro positioning location.
Re-designed rear mounted rudder servo mount.
Geared up with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for basic yet stiff frame construction, permitting simple assembly and maintenance.
High speed ranked thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Functions:
Revamped 3GX represents the next generation of multi function flybarless system. The drastically improved efficiency will develop an instant impact on any lovers.
3GX is presently the tiniest and lightest flybarless system on the market. Two ports to directly link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through an easy process. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated directions on the computer setup software directs the user through a step by step setup process, permitting quick setups without leaving out any actions.
Assistance Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity package, 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is required, lowering electronic wire clutter.
Customized specifications have actually been opened up in 3GX to enable pilots to fine tune many settings for swashplate and rudder. Settings export feature permits customized settings to be shared amongst pals.
3GX makes use of gyroscope sensing units of the greatest specs when compared to other flybarless systems presently on the market, permitting it to be used under severe conditions. Dual axis plus rudder sensing unit drastically enhances swashplate and rudder correction precision compared to last generation 3G. This is plainly obvious in stable hover along with highly aerobatic regimens.
Suitable for helicopter of all class from 200 to 700, radiance engine or electric powered. The superior vibration resistant attribute appears even when mounted with harder double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with an entirely re-written firmware. The outcome is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily performed with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the best integration in between 3GX and helicopter.
Assistance with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and altitude, along with self-governing method point flights and return home functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Built in guv function: Yes

Maximum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 131T

Tail Own Equipment: 34T

Own Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable battery charger
Dial Pitch Gauge and various tools for assembly