Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Package. This extraordinary package includes not only the T-Rex 550E DFC helicopter, however likewise a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Furthermore, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually likewise been included, offering you with an extraordinary helicopter kit and a similarly remarkable electronics package all in the very same box.
550E DFC Functions:
Equipped with the low CG DFC rotor head, efficiently decreases wind resistance during flight, offering the most direct and exact control feel back to the pilot, exibiting exhilarating 3D performance and inconceivable flight speed.
High specification MOD1 CNC helical primary equipment increases equipment mesh area, and minimizes equipment sound during flight.
Lightweight rigid metal primary shaft bearing obstructs.
High quality tail gearbox design, combined with double point installed tail pitch control assembly to reduce slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder locking and control effectiveness.
Body install boosts body rigidness and added gyro placement area.
Re-designed rear installed rudder servo install.
Equipped with MX series high efficiency brushless motor.
2.0mm 3K carbon fiber side frame for simple yet rigid frame construction, permitting easy assembly and maintenance.
High speed rated thrust bearings in tail blade grips.
High efficiency torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Redesigned 3GX represents the next generation of multi function flybarless system. The dramatically improved performance will produce an instant effect on any lovers.
3GX is presently the tiniest and lightest flybarless system on the marketplace. Two ports to directly link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer system setup software application directs the user through an action by step setup procedure, permitting fast setups without omitting any actions.
Assistance Bluetooth connectivity. With the soon to be launched Bluetooth connectivity kit, 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, minimizing electronic wire mess.
Custom criteria have actually been opened up in 3GX to enable pilots to fine tune many settings for swashplate and rudder. Settings export feature permits custom settings to be shared among buddies.
3GX uses gyroscope sensing units of the highest requirements when compared with other flybarless systems presently on the marketplace, allowing it to be utilized under extreme conditions. Dual axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy compared with last generation 3G. This is plainly visible in steady hover as well as extremely aerobatic routines.
Ideal for helicopter of all class from 200 to 700, radiance engine or electric powered. The exceptional vibration resistant characteristic is evident even when installed with more difficult double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The result is a significant stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette payment function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
3GX's rudder permits consistent rudder feel even under high speed conditions. This exceptional control feel will enable pilots of all ability levels to experience the best combination between 3GX and helicopter.
Assistance with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and elevation, as well as autonomous way point flights and return home functions.
3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Built in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 131T

Tail Own Equipment: 34T

Own Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Package
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible battery charger
Dial Pitch Gauge and various tools for assembly