Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Package. This amazing package includes not just the T-Rex 550E DFC helicopter, but likewise a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually likewise been included, offering you with an incredible helicopter package and an equally impressive electronics package all in the exact same box.
550E DFC Functions:
Equipped with the low CG DFC rotor head, efficiently decreases wind resistance throughout flight, offering the most direct and accurate control feel back to the pilot, exibiting thrilling 3D performance and inconceivable flight speed.
High spec MOD1 CNC helical primary equipment increases equipment mesh location, and lessens equipment noise throughout flight.
Light-weight stiff metal primary shaft bearing blocks.
High quality tail gearbox style, integrated with dual point installed tail pitch control assembly to decrease slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control effectiveness.
Body install increases body rigidness and added gyro positioning location.
Re-designed rear installed rudder servo install.
Equipped with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for basic yet stiff frame construction, enabling easy assembly and maintenance.
High speed ranked thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the ultimate fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Revamped 3GX represents the next generation of multi function flybarless system. The dramatically enhanced performance will create an immediate impact on any lovers.
3GX is presently the smallest and lightest flybarless system on the marketplace. 2 ports to directly link Spektrum and JR satellite receivers, along with complete assistance of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated instructions on the computer system setup software application directs the user through a step by step setup procedure, enabling fast setups without omitting any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection package, 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, decreasing electronic wire mess.
Customized parameters have actually been opened up in 3GX to enable pilots to tweak many settings for swashplate and rudder. Settings export function enables customized settings to be shared among pals.
3GX utilizes gyroscope sensing units of the greatest specs when compared to other flybarless systems presently on the marketplace, enabling it to be used under harsh conditions. Double axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy compared to last generation 3G. This is plainly visible in stable hover along with highly aerobatic regimens.
Suitable for helicopter of all class from 200 to 700, radiance engine or electric powered. The remarkable vibration resistant characteristic appears even when installed with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with an entirely re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette payment function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily performed with accuracy.
3GX's rudder enables constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the perfect combination in between 3GX and helicopter.
Support with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and altitude, along with self-governing way point flights and return home functions.
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Integrated in governor function: Yes

Optimum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Package
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable charger
Dial Pitch Gauge and numerous tools for assembly