Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Kit. This extraordinary package consists of not just the T-Rex 550E DFC helicopter, but also a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Furthermore, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually also been consisted of, providing you with an extraordinary helicopter set and an equally impressive electronic devices package all in the exact same box.
550E DFC Features:
Equipped with the low CG DFC rotor head, successfully lowers wind resistance throughout flight, providing the most direct and precise control feel back to the pilot, exibiting exhilarating 3D performance and unthinkable flight speed.
High spec MOD1 CNC helical primary gear increases gear mesh area, and minimizes gear sound throughout flight.
Light-weight stiff metal primary shaft bearing obstructs.
High quality tail gearbox design, combined with double point installed tail pitch control assembly to minimize slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control effectiveness.
Body install increases body rigidity and included gyro placement area.
Re-designed rear installed rudder servo install.
Equipped with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for easy yet stiff frame construction, allowing for simple assembly and maintenance.
High speed rated thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Features:
Redesigned 3GX represents the next generation of multi function flybarless system. The considerably enhanced performance will create an immediate influence on any enthusiasts.
3GX is presently the tiniest and lightest flybarless system on the marketplace. 2 ports to directly connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated directions on the computer system setup software application directs the user through a step by action setup process, allowing for fast setups without omitting any actions.
Assistance Bluetooth connectivity. With the soon to be released Bluetooth connectivity set, 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, minimizing electronic wire clutter.
Custom criteria have actually been opened up in 3GX to permit pilots to fine tune various settings for swashplate and rudder. Settings export function permits custom settings to be shared amongst good friends.
3GX makes use of gyroscope sensing units of the greatest specifications when compared to other flybarless systems presently on the marketplace, allowing it to be used under extreme conditions. Double axis plus rudder sensing unit considerably improves swashplate and rudder correction precision compared to last generation 3G. This is plainly noticeable in stable hover as well as extremely aerobatic routines.
Appropriate for helicopter of all class from 200 to 700, radiance engine or electric powered. The remarkable vibration resistant attribute appears even when installed with more difficult double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The outcome is a significant stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This excellent control feel will permit pilots of all skill levels to experience the perfect combination in between 3GX and helicopter.
Assistance with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize and hold position and altitude, as well as self-governing way point flights and return home functions.
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Built in guv function: Yes

Maximum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 131T

Tail Own Gear: 34T

Own Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable battery charger
Dial Pitch Gauge and different tools for assembly