Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Kit. This unbelievable plan includes not just the T-Rex 550E DFC helicopter, but likewise a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have likewise been consisted of, supplying you with an amazing helicopter set and a similarly impressive electronics plan all in the exact same box.
550E DFC Features:
Geared up with the low CG DFC rotor head, effectively decreases wind resistance during flight, supplying the most direct and exact control feel back to the pilot, exibiting exciting 3D performance and unimaginable flight speed.
High spec MOD1 CNC helical primary equipment increases equipment mesh location, and lessens equipment sound during flight.
Lightweight rigid metal primary shaft bearing blocks.
High quality tail transmission design, combined with dual point installed tail pitch control assembly to minimize slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder locking and control effectiveness.
Body install increases body rigidness and included gyro positioning location.
Re-designed rear installed rudder servo install.
Geared up with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for basic yet rigid frame building and construction, permitting easy assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Features:
Upgraded 3GX represents the next generation of multi function flybarless system. The considerably improved performance will produce an immediate impact on any enthusiasts.
3GX is presently the tiniest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated guidelines on the computer system setup software directs the user through an action by action setup process, permitting fast setups without omitting any actions.
Assistance Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity set, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, reducing electronic wire mess.
Custom-made specifications have been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export function enables custom settings to be shared among good friends.
3GX uses gyroscope sensing units of the greatest specs when compared to other flybarless systems presently on the marketplace, allowing it to be utilized under harsh conditions. Double axis plus rudder sensor considerably enhances swashplate and rudder correction accuracy compared to last generation 3G. This is plainly obvious in stable hover along with highly aerobatic regimens.
Ideal for helicopter of all class from 200 to 700, glow engine or electrical powered. The superior vibration resistant characteristic appears even when installed with harder double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The outcome is a dramatic stability improvement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive dexterity.
With integrated in pirouette payment function, 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This outstanding control feel will allow pilots of all ability levels to experience the best integration in between 3GX and helicopter.
Assistance with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support and hold position and elevation, along with autonomous way point flights and return home functions.
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in guv function: Yes

Optimum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 131T

Tail Own Equipment: 34T

Own Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible battery charger
Dial Pitch Gauge and numerous tools for assembly