Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Set. This incredible plan includes not only the T-Rex 550E DFC helicopter, however likewise a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Furthermore, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have likewise been included, providing you with an unbelievable helicopter package and a similarly excellent electronics plan all in the same box.
550E DFC Functions:
Geared up with the low CG DFC rotor head, effectively decreases wind resistance during flight, providing the most direct and exact control feel back to the pilot, exibiting exciting 3D performance and unthinkable flight speed.
High spec MOD1 CNC helical primary equipment increases equipment mesh area, and reduces equipment sound during flight.
Light-weight stiff metal primary shaft bearing obstructs.
High quality tail gearbox design, combined with double point installed tail pitch control assembly to decrease slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control efficiency.
Body install increases body rigidness and included gyro positioning place.
Re-designed rear installed rudder servo install.
Geared up with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for basic yet stiff frame construction, allowing for simple assembly and maintenance.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the supreme fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Upgraded 3GX represents the next generation of multi function flybarless system. The significantly improved performance will produce an immediate impact on any lovers.
3GX is presently the tiniest and lightest flybarless system on the market. Two ports to straight connect Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a basic process. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer system setup software application directs the user through an action by step setup process, allowing for fast setups without omitting any steps.
Assistance Bluetooth connectivity. With the soon to be released Bluetooth connectivity package, 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, decreasing electronic wire mess.
Custom specifications have been opened up in 3GX to permit pilots to tweak various settings for swashplate and rudder. Settings export feature allows custom-made settings to be shared among friends.
3GX utilizes gyroscope sensors of the greatest specs when compared with other flybarless systems presently on the market, enabling it to be used under extreme conditions. Double axis plus rudder sensing unit significantly enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly visible in stable hover along with highly aerobatic routines.
Appropriate for helicopter of all class from 200 to 700, radiance engine or electric powered. The exceptional vibration resistant attribute appears even when installed with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, together with a completely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
3GX's rudder allows consistent rudder feel even under high speed conditions. This exceptional control feel will permit pilots of all ability levels to experience the best integration in between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize and hold position and altitude, along with self-governing method point flights and return house functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 131T

Tail Own Equipment: 34T

Own Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible charger
Dial Pitch Gauge and different tools for assembly