Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Package. This amazing plan consists of not only the T-Rex 550E DFC helicopter, but also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have also been included, providing you with an extraordinary helicopter set and an equally outstanding electronics plan all in the very same box.
550E DFC Functions:
Equipped with the low CG DFC rotor head, efficiently minimizes wind resistance during flight, providing the most direct and accurate control feel back to the pilot, exibiting thrilling 3D efficiency and unthinkable flight speed.
High specification MOD1 CNC helical primary gear increases gear mesh area, and decreases gear sound during flight.
Lightweight rigid metal primary shaft bearing obstructs.
High quality tail transmission style, integrated with dual point mounted tail pitch control assembly to reduce slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control effectiveness.
Body mount boosts body rigidity and included gyro positioning place.
Re-designed rear mounted rudder servo mount.
Equipped with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for easy yet rigid frame construction, permitting simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the ultimate fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Revamped 3GX represents the next generation of multi function flybarless system. The significantly improved efficiency will create an immediate influence on any lovers.
3GX is currently the tiniest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through an easy process. In addition, the 3GX can support all of the CCPM swashplate systems currently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated directions on the computer system setup software application directs the user through a step by step setup process, permitting quick setups without omitting any actions.
Support Bluetooth connectivity. With the quickly to be released Bluetooth connectivity set, 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps permitting live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, lowering electronic wire mess.
Custom specifications have been opened up in 3GX to allow pilots to fine tune many settings for swashplate and rudder. Settings export function allows custom-made settings to be shared amongst good friends.
3GX makes use of gyroscope sensors of the highest requirements when compared to other flybarless systems currently on the marketplace, permitting it to be used under extreme conditions. Dual axis plus rudder sensor significantly improves swashplate and rudder correction precision compared to last generation 3G. This is plainly noticeable in stable hover in addition to extremely aerobatic routines.
Ideal for helicopter of all class from 200 to 700, radiance engine or electric powered. The exceptional vibration resistant characteristic is evident even when mounted with more difficult double sided mounting tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a significant stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily performed with precision.
3GX's rudder allows consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all ability levels to experience the best integration between 3GX and helicopter.
Support with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support and hold position and elevation, in addition to self-governing method point flights and return home functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Built in guv function: Yes

Optimum working voltage: 8.5V
550E DFC Specs:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 131T

Tail Own Gear: 34T

Own Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Package
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible battery charger
Dial Pitch Gauge and various tools for assembly