Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Package. This amazing package consists of not just the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Furthermore, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have also been consisted of, providing you with an extraordinary helicopter set and a similarly excellent electronics package all in the exact same box.
550E DFC Features:
Equipped with the low CG DFC rotor head, efficiently minimizes wind resistance throughout flight, providing the most direct and exact control feel back to the pilot, exibiting exciting 3D efficiency and unimaginable flight speed.
High spec MOD1 CNC helical main equipment increases equipment mesh location, and decreases equipment noise throughout flight.
Lightweight rigid metal main shaft bearing blocks.
High quality tail gearbox design, combined with dual point installed tail pitch control assembly to lessen slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder locking and control effectiveness.
Body mount boosts body rigidness and added gyro positioning location.
Re-designed rear installed rudder servo mount.
Equipped with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for basic yet rigid frame construction, permitting simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the supreme fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Features:
Upgraded 3GX represents the next generation of multi function flybarless system. The considerably enhanced efficiency will produce an immediate impact on any lovers.
3GX is currently the tiniest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated directions on the computer system setup software application directs the user through a step by step setup procedure, permitting fast setups without leaving out any steps.
Support Bluetooth connectivity. With the soon to be launched Bluetooth connectivity set, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, reducing electronic wire clutter.
Customized specifications have been opened up in 3GX to allow pilots to tweak numerous settings for swashplate and rudder. Settings export function permits customized settings to be shared among buddies.
3GX makes use of gyroscope sensing units of the greatest requirements when compared with other flybarless systems currently on the marketplace, permitting it to be utilized under severe conditions. Dual axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision compared with last generation 3G. This is clearly obvious in steady hover as well as highly aerobatic routines.
Appropriate for helicopter of all class from 200 to 700, glow engine or electric powered. The exceptional vibration resistant attribute is evident even when installed with harder double sided mounting tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a significant stability improvement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive dexterity.
With integrated in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This excellent control feel will allow pilots of all skill levels to experience the ideal combination in between 3GX and helicopter.
Support with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and elevation, as well as self-governing way point flights and return house functions.
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 131T

Tail Drive Equipment: 34T

Drive Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Package
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible charger
Dial Pitch Gauge and numerous tools for assembly