Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Kit. This incredible package includes not just the T-Rex 550E DFC helicopter, but also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have actually also been included, offering you with an incredible helicopter package and an equally excellent electronics package all in the same box.
550E DFC Features:
Geared up with the low CG DFC rotor head, effectively reduces wind resistance throughout flight, offering the most direct and exact control feel back to the pilot, exibiting exciting 3D performance and unthinkable flight speed.
High spec MOD1 CNC helical main equipment increases equipment mesh area, and lessens equipment noise throughout flight.
Light-weight stiff metal main shaft bearing obstructs.
High quality tail transmission design, combined with dual point installed tail pitch control assembly to reduce slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder locking and control efficiency.
Body mount boosts body rigidness and added gyro placement area.
Re-designed rear installed rudder servo mount.
Geared up with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for easy yet stiff frame building, allowing for easy assembly and maintenance.
High speed ranked thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the supreme fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Features:
Upgraded 3GX represents the next generation of multi function flybarless system. The drastically improved performance will develop an immediate impact on any enthusiasts.
3GX is currently the tiniest and lightest flybarless system on the market. 2 ports to directly link Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a basic procedure. In addition, the 3GX can support all the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic showed instructions on the computer setup software directs the user through an action by action setup procedure, allowing for fast setups without omitting any steps.
Support Bluetooth connection. With the quickly to be released Bluetooth connection package, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, minimizing electronic wire mess.
Custom specifications have actually been opened up in 3GX to enable pilots to tweak many settings for swashplate and rudder. Settings export feature permits custom-made settings to be shared amongst pals.
3GX uses gyroscope sensors of the greatest requirements when compared to other flybarless systems currently on the market, permitting it to be utilized under severe conditions. Double axis plus rudder sensing unit drastically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly obvious in stable hover as well as extremely aerobatic regimens.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when installed with harder double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The outcome is a significant stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette compensation function, 3GX has the ability to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This exceptional control feel will enable pilots of all ability levels to experience the perfect integration between 3GX and helicopter.
Support with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support and hold position and elevation, as well as self-governing method point flights and return home functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Built in governor function: Yes

Optimum working voltage: 8.5V
550E DFC Specs:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable charger
Dial Pitch Gauge and different tools for assembly