Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Kit. This extraordinary bundle includes not just the T-Rex 550E DFC helicopter, however likewise a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually likewise been included, offering you with an incredible helicopter kit and a similarly remarkable electronics bundle all in the very same box.
550E DFC Functions:
Geared up with the low CG DFC rotor head, successfully reduces wind resistance during flight, offering the most direct and precise control feel back to the pilot, exibiting exhilarating 3D performance and inconceivable flight speed.
High spec MOD1 CNC helical primary gear increases gear mesh location, and lessens gear noise during flight.
Lightweight stiff metal primary shaft bearing blocks.
High quality tail transmission style, combined with dual point mounted tail pitch control assembly to lessen slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control efficiency.
Body install boosts body rigidity and included gyro placement area.
Re-designed rear mounted rudder servo install.
Geared up with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for easy yet stiff frame building and construction, permitting simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Redesigned 3GX represents the next generation of multi function flybarless system. The drastically improved performance will create an immediate effect on any lovers.
3GX is currently the tiniest and lightest flybarless system on the market. Two ports to directly link Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate systems currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer system setup software directs the user through an action by action setup procedure, permitting quick setups without leaving out any steps.
Assistance Bluetooth connectivity. With the quickly to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, decreasing electronic wire clutter.
Customized criteria have actually been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export feature allows customized settings to be shared among good friends.
3GX utilizes gyroscope sensors of the greatest requirements when compared with other flybarless systems currently on the market, permitting it to be used under severe conditions. Dual axis plus rudder sensing unit drastically enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly visible in steady hover in addition to highly aerobatic routines.
Ideal for helicopter of all class from 200 to 700, radiance engine or electrical powered. The remarkable vibration resistant attribute is evident even when mounted with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette compensation function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with precision.
3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilots of all skill levels to experience the perfect combination between 3GX and helicopter.
Assistance with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and altitude, in addition to self-governing method point flights and return home functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Built in guv function: Yes

Maximum working voltage: 8.5V
550E DFC Specs:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible battery charger
Dial Pitch Gauge and numerous tools for assembly