Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Set. This incredible plan includes not only the T-Rex 550E DFC helicopter, but also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually also been consisted of, providing you with an unbelievable helicopter package and an equally impressive electronics plan all in the exact same box.
550E DFC Functions:
Equipped with the low CG DFC rotor head, efficiently minimizes wind resistance throughout flight, providing the most direct and precise control feel back to the pilot, exibiting exciting 3D performance and unimaginable flight speed.
High specification MOD1 CNC helical primary gear increases gear mesh area, and reduces gear noise throughout flight.
Light-weight rigid metal primary shaft bearing blocks.
High quality tail transmission style, combined with double point mounted tail pitch control assembly to decrease slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder locking and control efficiency.
Body mount increases body rigidness and included gyro placement area.
Re-designed rear mounted rudder servo mount.
Equipped with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for easy yet rigid frame construction, permitting easy assembly and maintenance.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the supreme fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Upgraded 3GX represents the next generation of multi function flybarless system. The considerably improved performance will create an immediate impact on any lovers.
3GX is currently the tiniest and lightest flybarless system on the marketplace. Two ports to directly connect Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate systems currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic highlighted instructions on the computer setup software directs the user through an action by action setup procedure, permitting fast setups without omitting any actions.
Assistance Bluetooth connection. With the soon to be launched Bluetooth connection package, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps allowing live modifications to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, reducing electronic wire mess.
Custom-made specifications have actually been opened up in 3GX to permit pilots to tweak numerous settings for swashplate and rudder. Settings export function allows custom-made settings to be shared amongst pals.
3GX utilizes gyroscope sensors of the highest specifications when compared with other flybarless systems currently on the marketplace, allowing it to be utilized under severe conditions. Double axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly noticeable in stable hover along with extremely aerobatic regimens.
Ideal for helicopter of all class from 200 to 700, radiance engine or electrical powered. The superior vibration resistant quality appears even when mounted with harder double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The result is a significant stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX is able to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily carried out with precision.
3GX's rudder allows consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all ability levels to experience the best integration between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and elevation, along with autonomous way point flights and return home functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 131T

Tail Own Gear: 34T

Own Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable charger
Dial Pitch Gauge and various tools for assembly