Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Kit. This unbelievable plan consists of not just the T-Rex 550E DFC helicopter, but likewise a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually likewise been included, supplying you with an unbelievable helicopter kit and an equally impressive electronic devices plan all in the same box.
550E DFC Features:
Geared up with the low CG DFC rotor head, successfully decreases wind resistance throughout flight, supplying the most direct and exact control feel back to the pilot, exibiting exciting 3D efficiency and inconceivable flight speed.
High spec MOD1 CNC helical primary gear increases gear mesh location, and reduces gear noise throughout flight.
Light-weight rigid metal primary shaft bearing obstructs.
High quality tail gearbox style, combined with dual point installed tail pitch control assembly to minimize slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control effectiveness.
Body mount increases body rigidness and included gyro placement place.
Re-designed rear installed rudder servo mount.
Geared up with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for simple yet rigid frame building and construction, enabling simple assembly and maintenance.
High speed rated thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Features:
Redesigned 3GX represents the next generation of multi function flybarless system. The considerably enhanced efficiency will develop an immediate effect on any lovers.
3GX is presently the smallest and lightest flybarless system on the market. Two ports to straight connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic showed directions on the computer system setup software directs the user through a step by action setup procedure, enabling quick setups without leaving out any actions.
Assistance Bluetooth connection. With the quickly to be released Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, reducing electronic wire mess.
Custom specifications have actually been opened up in 3GX to permit pilots to fine tune many settings for swashplate and rudder. Settings export feature enables custom-made settings to be shared amongst friends.
3GX uses gyroscope sensing units of the greatest specs when compared to other flybarless systems presently on the market, enabling it to be used under severe conditions. Double axis plus rudder sensor considerably enhances swashplate and rudder correction accuracy compared to last generation 3G. This is plainly visible in stable hover as well as highly aerobatic routines.
Appropriate for helicopter of all class from 200 to 700, radiance engine or electric powered. The exceptional vibration resistant characteristic is evident even when installed with more difficult double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all ability levels to experience the perfect integration between 3GX and helicopter.
Assistance with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support and hold position and altitude, as well as self-governing method point flights and return home functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Built in guv function: Yes

Optimum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable charger
Dial Pitch Gauge and various tools for assembly