Align T-Rex 550E 3GX Combo

Line up T-Rex 550E 3GX Super Combination V2 with 3GX compact flybarless system. Recently designed aerodynamically effective metal main blade control system, with high rigidit and superior control accuracy. High efficiency torque tube drive.

Features:

• Recently designed aerodynamically effective metal main blade control system, with high rigidity and superior control accuracy
• New lightweight high accuracy main equipment, with exceptional balance and stability
• The most ideal motor pinion ratio and tail equipment ratio to achieve the most effective power output and flight characteristic
• New lightweight rigid metal main shaft bearing blocks
• Integrated swash anti-rotation guide and gyro mounting platform
• Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more structured design also permits easier disassembly
• Dual area battery install for ideal CG position based upon battery weight
• 3K carbon fiber side frame and base plate, simple yet extremely rigid for ease of maintenance
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control efficiency
• Recently designed rear installed rudder servo install, for pleasing visual as well as enhancing side frame strength and protection to the rudder servo
• High speed rated thrust bearings in tail blade grips.
• High efficiency torque tube drive
• Extra radial bearing is added to the one way bearing block to guarantee smooth rotation, and get rid of jammed one way bearing
• High strength carbon fiber used on tail fins and tail boom supports
• New lightweight landing gears
• High grade airbrushed fiberglass canopy

Brand new upgraded 3GX represents a new generation of multi function flybarless system. The considerably enhanced performance will create instant impact on any lovers.

3GX is currently the tiniest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.

Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a basic process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.

Graphical illustrated instruction on the computer system setup software application directs the user through an action by step setup process, permitting fast setups without leaving out any steps.

Support Bluetooth connection. With the soon to be launched Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to 3GX without powering down.

With 3GX's integrated in Align RCE-G600 governor function, no external governor is had to reduce electronic wire clutters.

A library of pre-configured 3GX settings specifically readily available for T-Rex series of helicopters, enabling pilots to achieve the most ideal setup for their helicopters.

Three levels of flight mode is readily available on the 3GX to supply different feels from newbies to innovative pilots.

Custom criteria have actually been opened up in 3GX to allow pilots to tweak numerous settings for swashplate and rudder. Settings export function enables custom-made settings to be shared among friends.

3GX uses brand name new gyroscope sensors of the greatest specifications when compared with other flybarless systems currently on the market, enabling it to be used under severe conditions. Dual axis plus rudder sensor considerably improves swashplate and rudder correction accuracy compared with last generation 3G. This is clearly noticeable in stable hover as well as extremely aerobatic routines.

Suitable for helicopter of all class from 200 to 700, radiance engine or electrical powered. The superior vibration resistant characteristic appears even when installed with harder double sided mounting tape.

3GX uses 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The outcome is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.

With integrated in pirouette compensation function, 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with accuracy.

3GX's rudder control is similar to the high end GP-780 gyro in that rudder level of sensitivity is catered specifically for the helicopter's rudder action attributes, enabling consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all ability levels to experience the perfect integration in between 3GX and helicopter.

Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly readily available position hold gyro system uses just 6 sensors, 3GX's total of 10 sensors guarantee positioning of helicopter with superior precision, supplying the supreme service for aerial photography or other unique purposes.

Requires:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 5200mAh
Dial Pitch Gauge

Keep in mind: Users must have a certain concept of security to run the R/C helicopters. Be sure to check out and adhere to related safety notes of instruction manual before flying.

Specifications:

Length: 1042mm
Height: 364mm
Maim Blade Length: 520mm
Main Rotor Diameter: 1188mm
Tail Rotor Diameter: 254mm
Motor Drive Equipment: 16T
Main Drive Equipment: 170T
Autorotaion Tail Drive Equipment: 180T
Tail Own Equipment: 40T
Own Equipment Ratio: 1:10.62:4.5
Weight (With Motor): 1800g
Flying Weight: Approximate 2800g