Align T-Rex 550E 3GX Combo

Line up T-Rex 550E 3GX Super Combination V2 with 3GX compact flybarless system. Newly designed aerodynamically efficient metal primary blade control system, with high rigidit and remarkable control precision. High efficiency torque tube drive.

Features:

• Newly designed aerodynamically efficient metal primary blade control system, with high rigidness and remarkable control precision
• New lightweight high precision primary equipment, with outstanding balance and stability
• The most ideal motor pinion ratio and tail equipment ratio to attain the most efficient power output and flight particular
• New lightweight rigid metal primary shaft bearing blocks
• Integrated swash anti-rotation guide and gyro mounting platform
• Brand brand-new CNC machined metal tail transmission, with thicker side plates to increase rigidness. The more streamlined design also allows for easier disassembly
• Dual area battery mount for ideal CG position based upon battery weight
• 3K carbon fiber side frame and base plate, basic yet extremely rigid for ease of upkeep
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to enhance rudder lockingand control efficiency
• Newly designed rear mounted rudder servo mount, for pleasing aesthetic in addition to improving side frame strength and security to the rudder servo
• High speed ranked thrust bearings in tail blade grips.
• High efficiency torque tube drive
• Extra radial bearing is contributed to the one way bearing block to guarantee smooth rotation, and get rid of jammed one way bearing
• High strength carbon fiber utilized on tail fins and tail boom supports
• New lightweight landing gears
• High grade airbrushed fiberglass canopy

Brand brand-new revamped 3GX represents a brand-new generation of multi function flybarless system. The significantly enhanced efficiency will produce immediate influence on any enthusiasts.

3GX is currently the tiniest and lightest flybarless system on the market. Two ports to directly link Spektrum and JR satellite receivers, along with full assistance of Futaba's S-BUS system.

Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.

Graphical illustrated direction on the computer setup software directs the user through an action by step setup process, allowing for quick setups without omitting any steps.

Support Bluetooth connectivity. With the soon to be launched Bluetooth connectivity package, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps enabling live modifications to 3GX without powering down.

With 3GX's built in Align RCE-G600 governor function, no external governor is had to minimize electronic wire clutters.

A library of pre-configured 3GX settings specifically readily available for T-Rex series of helicopters, enabling pilots to attain the most ideal setup for their helicopters.

Three levels of flight mode is readily available on the 3GX to offer different feels from novices to advanced pilots.

Custom parameters have actually been opened up in 3GX to enable pilots to fine tune many settings for swashplate and rudder. Settings export function enables custom-made settings to be shared amongst friends.

3GX utilizes brand name brand-new gyroscope sensors of the greatest specs when compared with other flybarless systems currently on the market, enabling it to be utilized under extreme conditions. Dual axis plus rudder sensing unit significantly enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly visible in stable hover in addition to extremely aerobatic routines.

Suitable for helicopter of all class from 200 to 700, radiance engine or electrical powered. The remarkable vibration resistant characteristic is evident even when mounted with more difficult double sided mounting tape.

3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The result is a remarkable stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.

With built in pirouette compensation function, 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.

3GX's rudder control is similar to the luxury GP-780 gyro in that rudder level of sensitivity is catered specifically for the helicopter's rudder reaction qualities, enabling constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the ideal integration in between 3GX and helicopter.

Additional peripherals prepared for the 3GX consists of 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the typically readily available position hold gyro system utilizes just 6 sensors, 3GX's total of 10 sensors guarantee positioning of helicopter with remarkable precision, offering the ultimate service for aerial photography or other unique purposes.

Requires:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 5200mAh
Dial Pitch Gauge

Note: Users need to have a specific principle of security to run the R/C helicopters. Make certain to check out and adhere to related safety notes of instruction manual prior to flying.

Specifications:

Length: 1042mm
Height: 364mm
Maim Blade Length: 520mm
Main Rotor Size: 1188mm
Tail Rotor Size: 254mm
Motor Drive Gear: 16T
Main Drive Gear: 170T
Autorotaion Tail Drive Gear: 180T
Tail Drive Gear: 40T
Drive Gear Ratio: 1:10.62:4.5
Weight (With Motor): 1800g
Flying Weight: Approximate 2800g