Align T-Rex 550E 3GX Combo

Line up T-Rex 550E 3GX Super Combo V2 with 3GX compact flybarless system. Recently developed aerodynamically efficient metal main blade control system, with high rigidit and superior control precision. High effectiveness torque tube drive.

Features:

• Recently developed aerodynamically efficient metal main blade control system, with high rigidity and superior control precision
• New light-weight high precision main equipment, with exceptional balance and stability
• The most optimal motor pinion ratio and tail equipment ratio to attain the most efficient power output and flight particular
• New light-weight stiff metal main shaft bearing obstructs
• Integrated swash anti-rotation guide and gyro installing platform
• Brand brand-new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more streamlined style also enables easier disassembly
• Dual area battery install for optimal CG position based on battery weight
• 3K carbon fiber side frame and base plate, simple yet extremely stiff for ease of upkeep
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control efficiency
• Recently developed rear installed rudder servo install, for pleasing aesthetic in addition to enhancing side frame strength and protection to the rudder servo
• High speed rated thrust bearings in tail blade grips.
• High effectiveness torque tube drive
• Additional radial bearing is contributed to the one way bearing block to guarantee smooth rotation, and remove jammed one way bearing
• High strength carbon fiber used on tail fins and tail boom supports
• New light-weight landing equipments
• High grade airbrushed fiberglass canopy

Brand brand-new redesigned 3GX represents a brand-new generation of multi function flybarless system. The dramatically enhanced performance will develop instant effect on any lovers.

3GX is presently the tiniest and lightest flybarless system on the marketplace. 2 ports to directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.

Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a basic procedure. In addition, the 3GX can support all the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.

Graphical highlighted guideline on the computer setup software application directs the user through a step by step setup procedure, allowing for quick setups without leaving out any steps.

Support Bluetooth connectivity. With the soon to be launched Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to 3GX without powering down.

With 3GX's built in Align RCE-G600 guv function, no external guv is had to minimize electronic wire clutters.

A library of pre-configured 3GX settings specifically offered for T-Rex series of helicopters, enabling pilots to attain the most optimal setup for their helicopters.

Three levels of flight mode is offered on the 3GX to offer various feels from newbies to sophisticated pilots.

Custom specifications have actually been opened up in 3GX to enable pilots to fine tune many settings for swashplate and rudder. Settings export function allows custom settings to be shared amongst friends.

3GX makes use of brand brand-new gyroscope sensors of the highest requirements when compared to other flybarless systems presently on the marketplace, enabling it to be used under harsh conditions. Dual axis plus rudder sensor dramatically enhances swashplate and rudder correction precision compared to last generation 3G. This is clearly obvious in steady hover in addition to extremely aerobatic routines.

Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant attribute appears even when installed with more difficult double sided installing tape.

3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with a completely re-written firmware. The outcome is a dramatic stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.

With built in pirouette settlement function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns type of maneuvers are easily achieved with precision.

3GX's rudder control resembles the high end GP-780 gyro because rudder level of sensitivity is catered specifically for the helicopter's rudder response characteristics, enabling constant rudder feel even under high speed conditions. This exceptional control feel will enable pilot of all skill levels to experience the ideal integration in between 3GX and helicopter.

Additional peripherals prepared for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly offered position hold gyro system makes use of only 6 sensors, 3GX's total of 10 sensors guarantee positioning of helicopter with superior accuracy, supplying the ultimate service for aerial photography or other unique purposes.

Requires:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 5200mAh
Dial Pitch Gauge

Note: Users should have a specific concept of security to run the R/C helicopters. Be sure to read and comply with related safety notes of instruction manual before flying.

Specifications:

Length: 1042mm
Height: 364mm
Maim Blade Length: 520mm
Main Rotor Diameter: 1188mm
Tail Rotor Diameter: 254mm
Motor Drive Equipment: 16T
Main Drive Equipment: 170T
Autorotaion Tail Drive Equipment: 180T
Tail Drive Equipment: 40T
Drive Equipment Ratio: 1:10.62:4.5
Weight (With Motor): 1800g
Flying Weight: Approx 2800g