Align T-REX 500X TOP Combo (BL80A ESC)

Experienced in various of innovations, the brand name brand-new T-REX 500XT is now ready to go. More appealing and imaginative design concepts are all in here, it definitely would be your preferred T-REX 500XT design ever.

Refresh and fine-tune, T-REX 500XT adjust with brand name brand-new FL rotor head system, utilizes a very low CG design which reduces resistance throughout 3D maneuvers while increasing flight responsiveness and accuracy. A progressive design includes a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500XT main frame utilizes composite product integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a leading motor install design. Ingenious adjustable belt guide pulley, allows a practical way to adjust the belt tension by releasing or tightening the screw. The screw is utilized to preserve optimal belt tension in time to keep the very best. Likewise T-REX 500XT landing skid is slanted 5 degrees forward to enhance crashworthiness.

T-REX 500XT utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The most recent brand-new RCE-BL80A Brushless ESC assistance double BEC output from 5 ~ 8V providing efficient and exceptional power. The NEW DS530M/DS535M digital servos are with severe torque and speed action enable to support faster, more precise and precise flight performance.

Equipped with all the leading end electronic gadgets, T-REX 500XT is as stable and effective like the big scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm main blades for T-REX 500XT effectively enhance the flying stability and power performance. Improve the power for much better control enable to enjoy T-REX 500XT flights very same like other plus size helicopters.
New 78 size tail blades are longer in length and offer exceptional and precise tail holding performance, even throughout requiring 3D flight.

The brand name brand-new low CG 500FL Flybarless Rotor Head System utilizes the accuracy grinding of high-carbon steel hollow shaft effectively increase its concentricity. Enable to lower resistance throughout 3D maneuvers, increased flight responsiveness and accuracy. In addition, the styling appearance consistency with red anodized and stainless color, bring out the high quality much like 700 size 3D helicopter.

New Swashplate design with precise bearings functions in zero slop delivering a precise and precise controlled flight.

New 520MX(1600KV/3527) motor features high efficiency, exceptional power, outstanding torque, low present draw, and a low operating temperature level. Enable to provide keeping consistent torque and head speed through constant 3D maneuvers.

Brand brand-new CNC metal reinforcement plate and brace compare to frame mounting bolt effectively increase the torsional strength of main frame, under severe 3D maneuver, you can strongly feel its strong reinforcement from its structure. In addition, the styling appearance consistency with red anodized and stainless color bring out the high tactile appeal.
Carbon fiber side frame plates are produced utilizing an exclusive composite product integration technology which integrates the battery mounting rails into the frame. This unique usage of open areas within the frame develops a stiff frame and is visually pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

RCE-BL80A is specially designed for T-REX 500XT providing greater currency output and assistance for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Brand brand-new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / elimination of battery while providing protection for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for exceptional responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide pulley, allows a practical way to adjust the belt tension by releasing or tightening the screw. The screw is utilized to preserve optimal belt tension over time.
Brand New Belt Drive Assembly design enable peaceful operation and low cost on serviceability.

Ultilize of enhance main equipment case functions in utilizing bigger bearing has a higher load bring capability which reduces the loss of momentum and improves the efficiency, speed, and smoothness of the main rotor. The brand-new main equipment case and all-metal central pulley transmission system is an efficient design to deliver the supreme performance.

Landing skid is slanted 5 degrees forward to enhance crashworthiness.

A 19mm large Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is useful and improves the helicopters tail control.

The freshly designed double point supported tail control assembly delivers slop free performance while enhancing rudder resolution and precision.

The brand-new tail rotor holder design includes thrust bearings which increases resilience, as well as considerably enhancing the accuracy and efficiency of the tail performance when utilizing 78 size Tail Blades.

Standard devices

Microbeast PLUS Flybarless System x 1 set
RCE-BL80A Brushless ESC x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1

Specification
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Size: 1054mm
Tail Rotor Size: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Own Gear: 21T
Own Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450gAccessories

T-REX 500X SET Set x 1 
Microbeast PLUS Flybarless System x 1 set
470 Carbon Fiber Blades x 1
78 Tail Rotor Blade x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1 
RCE-BL80A Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
Transmitter(6-channel or more, helicopter system)
Receiver(6-channel or more)
SIX Li-Po 2600 ~ 3300mAh (3300mAh idea)
Digital Pitch Gauge