Align T-REX 500X TOP Combo (BL80A ESC)

Experienced in numerous of developments, the brand name brand-new T-REX 500XT is now ready to go. More attractive and imaginative style concepts are all in here, it definitely would be your favorite T-REX 500XT design ever.

Refresh and refine, T-REX 500XT adjust with brand name brand-new FL rotor head system, uses a very low CG style which reduces resistance throughout 3D maneuvers while increasing flight responsiveness and accuracy. A progressive style adds a gloss silver and red anodizing look which continue our quality advancement based upon our 700 class helicopter. The T-REX 500XT primary frame uses composite product integration innovation on carbon side frame plates, consisting of the addition of battery installing side rails, and a top motor install style. Ingenious adjustable belt guide pulley-block, enables a convenient way to change the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension with time to keep the best. Likewise T-REX 500XT landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500XT uses 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The latest brand-new RCE-BL80A Brushless ESC support double BEC output from 5 ~ 8V offering efficient and remarkable power. The NEW DS530M/DS535M digital servos are with severe torque and speed response allow to support faster, more exact and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500XT is as stable and effective like the large scale helicopters. It will re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500XT efficiently improve the flying stability and power performance. Enhance the power for much better control allow to enjoy T-REX 500XT flights exact same like other plus size helicopters.
New 78 size tail blades are longer in length and deal remarkable and exact tail holding performance, even throughout demanding 3D flight.

The brand name brand-new low CG 500FL Flybarless Rotor Head System uses the accuracy grinding of high-carbon steel hollow shaft efficiently increase its concentricity. Enable to reduce resistance throughout 3D maneuvers, increased flight responsiveness and accuracy. In addition, the styling look consistency with red anodized and stainless color, draw out the high quality just like 700 size 3D helicopter.

New Swashplate style with exact bearings features in absolutely no slop providing an exact and accurate regulated flight.

New 520MX(1600KV/3527) motor features high effectiveness, remarkable power, excellent torque, low current draw, and a low operating temperature level. Enable to provide maintaining consistent torque and head speed through constant 3D maneuvers.

Brand brand-new CNC metal reinforcement plate and brace compare to frame installing bolt efficiently increase the torsional strength of primary frame, under severe 3D maneuver, you can strongly feel its solid reinforcement from its structure. In addition, the styling look consistency with red anodized and stainless color draw out the high tactile appeal.
Carbon fiber side frame plates are produced utilizing a proprietary composite product integration innovation which integrates the battery installing rails into the frame. This distinct usage of open areas within the frame produces a rigid frame and is visually pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

RCE-BL80A is specifically designed for T-REX 500XT offering greater currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based upon servo specification.

Brand brand-new latching battery tray which uses integrated installing rails inside the frames to simplify insertion / removal of battery while offering protection for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support approximately 8.4V for remarkable responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide pulley-block, enables a convenient way to change the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.
Brand New Belt Drive Assembly style permit peaceful operation and low expense on serviceability.

Ultilize of reinforce primary gear case features in utilizing bigger bearing has a higher load bring capability which reduces the loss of momentum and enhances the effectiveness, speed, and smoothness of the primary rotor. The brand-new primary gear case and all-metal main pulley-block transmission system is an effective style to provide the supreme performance.

Landing skid is tilted 5 degrees forward to improve crashworthiness.

A 19mm wide Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

The recently designed double point supported tail control assembly provides slop complimentary performance while improving rudder resolution and precision.

The brand-new tail rotor holder style consists of thrust bearings which increases toughness, along with considerably improving the precision and effectiveness of the tail performance when utilizing 78 size Tail Blades.

Standard equipment

Microbeast PLUS Flybarless System x 1 set
RCE-BL80A Brushless ESC x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1

Spec
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Equipment: 12T
Main Drive Equipment: 134T
Main Drive Wheel: 80T
Tail Own Equipment: 21T
Own Equipment Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450gAccessories

T-REX 500X SET Set x 1 
Microbeast PLUS Flybarless System x 1 set
470 Carbon Fiber Blades x 1
78 Tail Rotor Blade x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1 
RCE-BL80A Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
Transmitter(6-channel or more, helicopter system)
Receiver(6-channel or more)
6S Li-Po 2600 ~ 3300mAh (3300mAh tip)
Digital Pitch Gauge