Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in various of developments, the brand name new T-REX 500X is now all set to go. More attractive and creative style concepts are all in here, it definitely would be your preferred T-REX 500X model ever.

Refresh and improve, T-REX 500X adapt with brand name new FL rotor head system, utilizes a very low CG style which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive style adds a gloss silver and red anodizing appearance which continue our quality development based upon our 700 class helicopter. The T-REX 500X primary frame utilizes composite product combination innovation on carbon side frame plates, including the addition of battery mounting side rails, and a leading motor install style. Ingenious adjustable belt guide sheave, allows a convenient way to adjust the belt tension by launching or tightening up the screw. The screw is used to preserve optimum belt tension over time to keep the very best. Also T-REX 500X landing skid is slanted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The current new RCE-BL80X Brushless ESC assistance dual BEC output from 6 ~ 8.4V offering efficient and remarkable power. The NEW DS530M/DS535M digital servos are with extreme torque and speed reaction allow to support quicker, more precise and accurate flight performance.

Equipped with all the top end electronic gadgets, T-REX 500X is as stable and powerful like the big scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500X successfully improve the flying stability and power efficiency. Improve the power for better control allow to delight in T-REX 500X flights exact same like other large size helicopters.

New 78 size tail blades are longer in length and offer remarkable and precise tail holding efficiency, even during demanding 3D flight.

The brand name new low CG 500FL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft successfully increase its concentricity. Permit to reduce resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance harmony with red anodized and stainless color, draw out the high quality much like 700 size 3D helicopter.

New Swashplate style with precise bearings functions in absolutely no slop delivering an exact and accurate controlled flight.

New 520MX(1600KV/3527) motor features high effectiveness, remarkable power, exceptional torque, low present draw, and a low operating temperature. Permit to provide keeping consistent torque and head speed through constant 3D maneuvers.

Brand new CNC metal support plate and brace compare to frame mounting bolt successfully increase the torsional stength of primary frame, under extreme 3D maneuver, you can strongly feel its solid support from its structure. In addition, the styling appearance harmony with red anodized and stainless color draw out the high tactile appeal.
Carbon fiber side frame plates are produced utilizing an exclusive composite product combination innovation which incorporates the battery mounting rails into the frame. This special use of open areas within the frame creates a stiff frame and is visually pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

RCE-BL80X is specifically designed for T-REX 500X offering higher currency output and assistance for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based upon servo specification.

Brand new locking battery tray which utilizes integrated mounting rails inside the frames to streamline insertion / removal of battery while offering security for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support as much as 8.4V for remarkable responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide sheave, allows a convenient way to adjust the belt tension by launching or tightening up the screw. The screw is used to preserve optimum belt tension over time.
Brand New Belt Drive Assembly style permit peaceful operation and low expense on serviceability.

Ultilize of strengthen primary gear case functions in utilizing bigger bearing has a higher load bring capacity which reduces the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The new primary gear case and all-metal main sheave transmission system is an efficient style to provide the supreme performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

A 19mm large Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

The recently designed dual point supported tail control assembly provides slop totally free efficiency while enhancing rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases durability, in addition to substantially enhancing the accuracy and effectiveness of the tail efficiency when utilizing 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Size: 1054mm
? Tail Rotor Size: 219mm
? Motor Pinion Gear: 12T
? Main Drive Gear: 134T
? Main Drive Pulley: 80T
? Tail Drive Gear: 21T
? Drive Gear Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X PACKAGE Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh tip)
?Digital Pitch Gauge