Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More appealing and innovative style ideas are all in here, it definitely would be your preferred T-REX 500X design ever.

Refresh and improve, T-REX 500X adapt with brand new FL rotor head system, makes use of an extremely low CG style which lowers resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive style adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame makes use of composite product combination innovation on carbon side frame plates, including the addition of battery mounting side rails, and a leading motor mount style. Innovative adjustable belt guide sheave, allows a convenient way to adjust the belt stress by launching or tightening up the screw. The screw is utilized to preserve optimum belt stress gradually to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to enhance crashworthiness.

T-REX 500X makes use of 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The most recent new RCE-BL80X Brushless ESC support double BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed action permit to support much faster, more precise and accurate flight performance.

Equipped with all the leading end electronic gadgets, T-REX 500X is as steady and effective like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm main blades for T-REX 500X successfully enhance the flying stability and power efficiency. Boost the power for much better control permit to enjoy T-REX 500X flights very same like other plus size helicopters.

New 78 size tail blades are longer in length and offer superior and precise tail holding efficiency, even during requiring 3D flight.

The brand new low CG 500FL Flybarless Rotor Head System makes use of the precision grinding of high-carbon steel hollow shaft successfully increase its concentricity. Enable to decrease resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance consistency with red anodized and stainless color, highlight the high quality just like 700 size 3D helicopter.

New Swashplate style with precise bearings functions in no slop providing an exact and accurate controlled flight.

New 520MX(1600KV/3527) motor features high performance, superior power, excellent torque, low current draw, and a low operating temperature level. Enable to offer maintaining consistent torque and head speed through continuous 3D maneuvers.

Brand new CNC metal reinforcement plate and brace compare to frame mounting bolt successfully increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure. In addition, the styling appearance consistency with red anodized and stainless color highlight the high tactile appeal.
Carbon fiber side frame plates are manufactured using a proprietary composite product combination innovation which incorporates the battery mounting rails into the frame. This special usage of open areas within the frame produces a rigid frame and is aesthetically pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

RCE-BL80X is specifically developed for T-REX 500X providing greater currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based on servo specification.

Brand new latching battery tray which makes use of integrated mounting rails inside the frames to streamline insertion / removal of battery while providing security for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support approximately 8.4V for superior responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide sheave, allows a convenient way to adjust the belt stress by launching or tightening up the screw. The screw is utilized to preserve optimum belt stress over time.
Brand New Belt Drive Assembly style allow for peaceful operation and low expense on serviceability.

Ultilize of strengthen main equipment case functions in using larger bearing has a higher load bring capability which lowers the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The new main equipment case and all-metal main sheave transmission system is an effective style to provide the supreme performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

A 19mm wide Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is useful and enhances the helicopters tail control.

The freshly developed double point supported tail control assembly provides slop complimentary efficiency while enhancing rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases resilience, as well as significantly enhancing the precision and performance of the tail efficiency when using 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Diameter: 1054mm
? Tail Rotor Diameter: 219mm
? Motor Pinion Equipment: 12T
? Main Drive Equipment: 134T
? Main Drive Sheave: 80T
? Tail Drive Equipment: 21T
? Drive Equipment Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X PACKAGE Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh idea)
?Digital Pitch Gauge