Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in various of developments, the brand name brand-new T-REX 500X is now prepared to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and improve, T-REX 500X adjust with brand name brand-new FL rotor head system, utilizes an exceptionally low CG design which reduces resistance throughout 3D maneuvers while increasing flight responsiveness and accuracy. A progressive design adds a gloss silver and red anodizing appearance which continue our quality advancement based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide sheave, permits a practical way to adjust the belt stress by releasing or tightening the screw. The screw is used to maintain ideal belt stress with time to keep the very best. Also T-REX 500X landing skid is tilted 5 degrees forward to enhance crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The most recent brand-new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V offering efficient and superior power. The NEW DS530M/DS535M digital servos are with severe torque and speed action enable to support much faster, more precise and precise flight performance.

Equipped with all the leading end electronic devices, T-REX 500X is as stable and powerful like the big scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm main blades for T-REX 500X successfully enhance the flying stability and power performance. Enhance the power for better control enable to delight in T-REX 500X flights exact same like other plus size helicopters.

New 78 size tail blades are longer in length and offer superior and precise tail holding performance, even throughout demanding 3D flight.

The brand name brand-new low CG 500FL Flybarless Rotor Head System utilizes the accuracy grinding of high-carbon steel hollow shaft successfully increase its concentricity. Permit to decrease resistance throughout 3D maneuvers, increased flight responsiveness and accuracy. In addition, the styling appearance consistency with red anodized and stainless color, highlight the high quality just like 700 size 3D helicopter.

New Swashplate design with precise bearings features in zero slop providing an accurate and precise regulated flight.

New 520MX(1600KV/3527) motor features high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. Permit to supply maintaining consistent torque and head speed through continuous 3D maneuvers.

Brand brand-new CNC metal support plate and brace compare with frame mounting bolt successfully increase the torsional stength of main frame, under severe 3D maneuver, you can highly feel its solid support from its structure. In addition, the styling appearance consistency with red anodized and stainless color highlight the high tactile appeal.
Carbon fiber side frame plates are manufactured utilizing an exclusive composite material integration technology which integrates the battery mounting rails into the frame. This special usage of open spaces within the frame produces a stiff frame and is visually pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

RCE-BL80X is specifically created for T-REX 500X offering greater currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based on servo specification.

Brand brand-new locking battery tray which utilizes integrated mounting rails inside the frames to streamline insertion / elimination of battery while offering defense for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support approximately 8.4V for superior responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide sheave, permits a practical way to adjust the belt stress by releasing or tightening the screw. The screw is used to maintain ideal belt stress over time.
Brand New Belt Drive Assembly design enable peaceful operation and low cost on serviceability.

Ultilize of reinforce main gear case features in utilizing bigger bearing has a higher load bring capacity which reduces the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The brand-new main gear case and all-metal central sheave transmission system is an effective design to deliver the ultimate performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

A 19mm large Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is useful and enhances the helicopters tail control.

The recently created dual point supported tail control assembly delivers slop free performance while enhancing rudder resolution and precision.

The brand-new tail rotor holder design consists of thrust bearings which increases sturdiness, in addition to considerably enhancing the accuracy and efficiency of the tail performance when utilizing 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Size: 1054mm
? Tail Rotor Size: 219mm
? Motor Pinion Gear: 12T
? Main Drive Gear: 134T
? Main Drive Pulley: 80T
? Tail Drive Gear: 21T
? Drive Gear Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X KIT Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion)
?Digital Pitch Gauge