Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in numerous of developments, the brand brand-new T-REX 500X is now ready to go. More attractive and imaginative style ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and improve, T-REX 500X adapt with brand brand-new FL rotor head system, makes use of a very low CG style which decreases resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive style adds a gloss silver and red anodizing look which continue our quality advancement based on our 700 class helicopter. The T-REX 500X main frame makes use of composite product integration technology on carbon side frame plates, consisting of the addition of battery mounting side rails, and a top motor install style. Ingenious adjustable belt guide pulley-block, permits a convenient way to change the belt tension by releasing or tightening the screw. The screw is used to maintain ideal belt tension gradually to keep the best. Likewise T-REX 500X landing skid is slanted 5 degrees forward to enhance crashworthiness.

T-REX 500X makes use of 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The latest brand-new RCE-BL80X Brushless ESC assistance dual BEC output from 6 ~ 8.4V providing effective and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed reaction permit to support faster, more precise and accurate flight performance.

Equipped with all the leading end electronic devices, T-REX 500X is as steady and effective like the big scale helicopters. It will re-define the 500-class helicopters in your mind.

New extended 470mm main blades for T-REX 500X effectively enhance the flying stability and power performance. Enhance the power for better control permit to delight in T-REX 500X flights same like other plus size helicopters.

New 78 size tail blades are longer in length and deal superior and precise tail holding performance, even during requiring 3D flight.

The brand brand-new low CG 500FL Flybarless Rotor Head System makes use of the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Permit to reduce resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling look harmony with red anodized and stainless color, draw out the high quality just like 700 size 3D helicopter.

New Swashplate style with precise bearings functions in zero slop delivering an exact and accurate controlled flight.

New 520MX(1600KV/3527) motor includes high effectiveness, superior power, excellent torque, low current draw, and a low operating temperature level. Permit to provide keeping consistent torque and head speed through continuous 3D maneuvers.

Brand brand-new CNC metal support plate and brace compare to frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can highly feel its strong support from its structure. In addition, the styling look harmony with red anodized and stainless color draw out the high tactile appeal.
Carbon fiber side frame plates are made utilizing an exclusive composite product integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame develops a stiff frame and is visually pleasing.

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

RCE-BL80X is specially created for T-REX 500X providing higher currency output and assistance for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Brand brand-new locking battery tray which makes use of incorporated mounting rails inside the frames to streamline insertion / elimination of battery while providing protection for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide pulley-block, permits a convenient way to change the belt tension by releasing or tightening the screw. The screw is used to maintain ideal belt tension over time.
Brand New Belt Drive Assembly style allow for quiet operation and low cost on serviceability.

Ultilize of reinforce main gear case functions in utilizing larger bearing has a higher load carry capability which decreases the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The brand-new main gear case and all-metal main pulley-block transmission system is an effective style to provide the ultimate performance.

Landing skid is slanted 5 degrees forward to enhance crashworthiness.

A 19mm large Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

The newly created dual point supported tail control assembly delivers slop complimentary performance while improving rudder resolution and precision.

The brand-new tail rotor holder style consists of thrust bearings which increases durability, along with substantially improving the accuracy and effectiveness of the tail performance when utilizing 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Diameter: 1054mm
? Tail Rotor Diameter: 219mm
? Motor Pinion Gear: 12T
? Main Drive Gear: 134T
? Main Drive Pulley-block: 80T
? Tail Drive Gear: 21T
? Drive Gear Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X KIT Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion)
?Digital Pitch Gauge