Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in numerous of developments, the brand new T-REX 500X is now prepared to go. More appealing and imaginative style concepts are all in here, it definitely would be your preferred T-REX 500X model ever.

Refresh and fine-tune, T-REX 500X adjust with brand new FL rotor head system, uses a very low CG style which decreases resistance throughout 3D maneuvers while increasing flight responsiveness and accuracy. A progressive style includes a gloss silver and red anodizing appearance which continue our quality development based upon our 700 class helicopter. The T-REX 500X main frame uses composite product integration technology on carbon side frame plates, including the addition of battery installing side rails, and a leading motor mount style. Ingenious adjustable belt guide sheave, allows a hassle-free method to change the belt tension by launching or tightening the screw. The screw is utilized to maintain ideal belt tension gradually to keep the best. Likewise T-REX 500X landing skid is slanted 5 degrees forward to improve crashworthiness.

T-REX 500X uses 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC assistance dual BEC output from 6 ~ 8.4V supplying effective and exceptional power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic gadgets, T-REX 500X is as steady and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm main blades for T-REX 500X efficiently improve the flying stability and power efficiency. Enhance the power for better control allow to take pleasure in T-REX 500X flights very same like other large size helicopters.

New 78 size tail blades are longer in length and deal exceptional and precise tail holding efficiency, even throughout requiring 3D flight.

The brand new low CG 500FL Flybarless Rotor Head System uses the accuracy grinding of high-carbon steel hollow shaft efficiently increase its concentricity. Allow to decrease resistance throughout 3D maneuvers, increased flight responsiveness and accuracy. In addition, the styling appearance harmony with red anodized and stainless color, draw out the high quality much like 700 size 3D helicopter.

New Swashplate style with precise bearings features in absolutely no slop delivering an accurate and accurate regulated flight.

New 520MX(1600KV/3527) motor includes high performance, exceptional power, exceptional torque, low current draw, and a low operating temperature. Allow to provide maintaining constant torque and head speed through continuous 3D maneuvers.

Brand new CNC metal support plate and brace compare to frame installing bolt efficiently increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid support from its structure. In addition, the styling appearance harmony with red anodized and stainless color draw out the high tactile appeal.
Carbon fiber side frame plates are produced using a proprietary composite product integration technology which integrates the battery installing rails into the frame. This unique usage of open areas within the frame produces a stiff frame and is visually pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

RCE-BL80X is specially created for T-REX 500X supplying greater currency output and assistance for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based upon servo specification.

Brand new locking battery tray which uses incorporated installing rails inside the frames to streamline insertion / elimination of battery while supplying defense for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support approximately 8.4V for exceptional responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide sheave, allows a hassle-free method to change the belt tension by launching or tightening the screw. The screw is utilized to maintain ideal belt tension over time.
Brand New Belt Drive Assembly style allow for peaceful operation and low expense on serviceability.

Ultilize of reinforce main equipment case features in using larger bearing has a greater load bring capability which decreases the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The new main equipment case and all-metal main sheave transmission system is an effective style to deliver the supreme performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

A 19mm wide Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

The newly created dual point supported tail control assembly provides slop free efficiency while improving rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases resilience, in addition to considerably improving the accuracy and performance of the tail efficiency when using 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Size: 1054mm
? Tail Rotor Size: 219mm
? Motor Pinion Equipment: 12T
? Main Drive Equipment: 134T
? Main Drive Pulley-block: 80T
? Tail Own Equipment: 21T
? Own Equipment Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X KIT Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh recommendation)
?Digital Pitch Gauge