Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in various of developments, the brand new T-REX 500X is now all set to go. More attractive and creative style ideas are all in here, it definitely would be your preferred T-REX 500X model ever.

Refresh and fine-tune, T-REX 500X adapt with brand new FL rotor head system, uses a very low CG style which reduces resistance throughout 3D maneuvers while increasing flight responsiveness and accuracy. A progressive style includes a gloss silver and red anodizing look which continue our quality advancement based on our 700 class helicopter. The T-REX 500X primary frame uses composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a leading motor install style. Ingenious adjustable belt guide pulley-block, allows a hassle-free method to adjust the belt stress by releasing or tightening the screw. The screw is used to keep optimal belt stress with time to keep the best. Likewise T-REX 500X landing skid is tilted 5 degrees forward to enhance crashworthiness.

T-REX 500X uses 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC assistance dual BEC output from 6 ~ 8.4V offering effective and remarkable power. The NEW DS530M/DS535M digital servos are with extreme torque and speed action enable to support faster, more exact and precise flight performance.

Equipped with all the leading end electronic devices, T-REX 500X is as stable and effective like the large scale helicopters. It will re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500X successfully enhance the flying stability and power efficiency. Boost the power for much better control enable to enjoy T-REX 500X flights very same like other large size helicopters.

New 78 size tail blades are longer in length and deal remarkable and exact tail holding efficiency, even throughout demanding 3D flight.

The brand new low CG 500FL Flybarless Rotor Head System uses the accuracy grinding of high-carbon steel hollow shaft successfully increase its concentricity. Permit to minimize resistance throughout 3D maneuvers, increased flight responsiveness and accuracy. In addition, the styling look harmony with red anodized and stainless color, highlight the high quality just like 700 size 3D helicopter.

New Swashplate style with exact bearings functions in absolutely no slop providing a precise and precise regulated flight.

New 520MX(1600KV/3527) motor features high effectiveness, remarkable power, outstanding torque, low current draw, and a low operating temperature. Permit to supply preserving consistent torque and head speed through constant 3D maneuvers.

Brand new CNC metal reinforcement plate and brace compare to frame mounting bolt successfully increase the torsional stength of primary frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure. In addition, the styling look harmony with red anodized and stainless color highlight the high tactile appeal.
Carbon fiber side frame plates are manufactured utilizing an exclusive composite material integration technology which integrates the battery mounting rails into the frame. This distinct usage of open areas within the frame creates a stiff frame and is visually pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

RCE-BL80X is specifically designed for T-REX 500X offering greater currency output and assistance for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based on servo specification.

Brand new latching battery tray which uses incorporated mounting rails inside the frames to streamline insertion / elimination of battery while offering defense for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support approximately 8.4V for remarkable responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide pulley-block, allows a hassle-free method to adjust the belt stress by releasing or tightening the screw. The screw is used to keep optimal belt stress over time.
Brand New Belt Drive Assembly style permit peaceful operation and low expense on serviceability.

Ultilize of enhance primary gear case functions in utilizing larger bearing has a greater load carry capacity which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The new primary gear case and all-metal central pulley-block transmission system is an efficient style to deliver the ultimate performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

A 19mm large Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

The freshly designed dual point supported tail control assembly delivers slop totally free efficiency while improving rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases sturdiness, in addition to significantly improving the accuracy and effectiveness of the tail efficiency when utilizing 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Size: 1054mm
? Tail Rotor Size: 219mm
? Motor Pinion Gear: 12T
? Main Drive Gear: 134T
? Main Drive Sheave: 80T
? Tail Drive Gear: 21T
? Drive Gear Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X SET Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh tip)
?Digital Pitch Gauge