Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in various of developments, the brand name new T-REX 500X is now prepared to go. More attractive and imaginative style ideas are all in here, it definitely would be your preferred T-REX 500X model ever.

Refresh and fine-tune, T-REX 500X adjust with brand name new FL rotor head system, uses a very low CG style which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive style includes a gloss silver and red anodizing look which continue our quality development based on our 700 class helicopter. The T-REX 500X primary frame uses composite product integration technology on carbon side frame plates, consisting of the addition of battery mounting side rails, and a leading motor mount style. Ingenious adjustable belt guide sheave, allows a practical way to adjust the belt stress by releasing or tightening the screw. The screw is used to keep optimum belt stress with time to keep the best. Also T-REX 500X landing skid is slanted 5 degrees forward to improve crashworthiness.

T-REX 500X uses 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC assistance dual BEC output from 6 ~ 8.4V offering efficient and remarkable power. The NEW DS530M/DS535M digital servos are with extreme torque and speed reaction permit to support much faster, more precise and precise flight performance.

Equipped with all the leading end electronic gadgets, T-REX 500X is as stable and effective like the big scale helicopters. It will re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500X effectively improve the flying stability and power performance. Improve the power for better control permit to take pleasure in T-REX 500X flights same like other large size helicopters.

New 78 size tail blades are longer in length and deal remarkable and precise tail holding performance, even during requiring 3D flight.

The brand name new low CG 500FL Flybarless Rotor Head System uses the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Permit to reduce resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling look consistency with red anodized and stainless color, bring out the high quality similar to 700 size 3D helicopter.

New Swashplate style with precise bearings functions in absolutely no slop delivering a precise and precise controlled flight.

New 520MX(1600KV/3527) motor includes high efficiency, remarkable power, exceptional torque, low current draw, and a low operating temperature. Permit to offer keeping consistent torque and head speed through continuous 3D maneuvers.

Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of primary frame, under extreme 3D maneuver, you can highly feel its strong reinforcement from its structure. In addition, the styling look consistency with red anodized and stainless color bring out the high tactile appeal.
Carbon fiber side frame plates are manufactured using an exclusive composite product integration technology which incorporates the battery mounting rails into the frame. This distinct usage of open spaces within the frame produces a rigid frame and is aesthetically pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

RCE-BL80X is specially created for T-REX 500X offering greater currency output and assistance for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Brand new latching battery tray which uses incorporated mounting rails inside the frames to streamline insertion / elimination of battery while offering protection for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support as much as 8.4V for remarkable responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide sheave, allows a practical way to adjust the belt stress by releasing or tightening the screw. The screw is used to keep optimum belt stress over time.
Brand New Belt Drive Assembly style permit peaceful operation and low expense on serviceability.

Ultilize of strengthen primary gear case functions in using larger bearing has a higher load carry capability which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The new primary gear case and all-metal central sheave transmission system is an efficient style to deliver the supreme performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

A 19mm large Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

The freshly created dual point supported tail control assembly provides slop free performance while enhancing rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases resilience, along with considerably enhancing the precision and efficiency of the tail performance when using 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Diameter: 1054mm
? Tail Rotor Diameter: 219mm
? Motor Pinion Gear: 12T
? Main Drive Gear: 134T
? Main Drive Wheel: 80T
? Tail Drive Gear: 21T
? Drive Gear Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X SET Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh tip)
?Digital Pitch Gauge