Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combination Helicopter Kit. This unbelievable plan consists of not just the T-REX 500 PRO Kit, however likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, three DS515M cyclic servos, one DS525M tail servo and lastly the incredible 3GX Programmable Flybarless System. This super combo supplies you with an extraordinary helicopter set and a similarly impressive electronic plan all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is geared up with an extremely low CG design to successfully minimize wind resistance during flight and provide the most direct and precise control feel back to the pilot, offering thrilling 3D efficiency and unthinkable flight speed.
A uniquely carbon composite technology successfully strengthen the weak locations and provides simplified electronic devices setup.
The servos can be mounted directly onto the frame without installing nuts.
The rear servo is mounted in-frame for a central design and ideal 3D efficiency.
MX series high performance brushless motor consisted of with heatsink design case and ingrained fan to considerably improve cooling and boost power output.
Unique quick release gyro and receiver mount design for quick removal and durable attachment.
High accuracy slant tooth (helical) main gear for greater load sustainability and lower sound output.
Redesigned tail transmission with greater material quality and simple maintenance.
High quality tail gearbox design, combined with upgraded double point mounted tail pitch control assembly to minimize slop and boost rudder control accuracy.
Extremely efficient shaft driven tail system which successfully minimize power loss found on belt driven systems. This likewise increases efficiency during flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to further improve the rudder locking effect and controllability.
Redesigned design battery installing platform to strengthen the frame along with to provide a mount for the electronic speed controller.
Redesigned lower CG landing gear design.
Styled aerodynamically canopy for the supreme fit, making the helicopter stick out.
Best tail gear ratio to minimize vibrations caused by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The considerably enhanced efficiency will create an instant influence on any lovers.
The 3GX is currently the smallest and lightest flybarless system on the market and features 2 ports to directly link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines utilizing the computer system setup software application directs the user through a step by step setup process, enabling fast setups without omitting any steps.
With the quickly to be launched Bluetooth connection set, the 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to attain the most ideal setup for their helicopter without the uncertainty.
Three levels of flight mode are offered to provide the ideal feel for beginner and advanced pilots.
Custom-made specifications have actually been established to allow pilots to tweak various swashplate and rudder settings and a settings export function permits custom-made settings to be shared among good friends.
The 3GX features the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The double axis plus rudder sensing unit considerably improves swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic regimens.
Appropriate for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant attributes appear even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, along with totally re-written firmware. The outcome is a remarkable improvement in stability that equals a flybarred helicopter, while offering explosive agility.
With a built in pirouette payment function, the 3GX is able to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with accuracy.
Rudder control resembles the luxury GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder reaction attributes, enabling consistent rudder feel even under high speed conditions. This excellent control feel will allow pilots of all skill levels to experience the ideal integration in between the 3GX and the helicopter.
Extra peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses an overall of 10 sensors, make sure positioning of the helicopter with superior precision and offering the supreme option for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Kit
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Pack 2600 ~ 4600mAh (3300mAh recommended)
Digital Pitch Gauge