Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This incredible bundle includes not only the T-REX 500 PRO Package, but also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, three DS515M cyclic servos, one DS525M tail servo and lastly the amazing 3GX Programmable Flybarless System. This extremely combination supplies you with an extraordinary helicopter set and a similarly remarkable electronic bundle all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is geared up with an exceptionally low CG design to efficiently minimize wind resistance during flight and provide the most direct and exact control feel back to the pilot, offering exciting 3D performance and unimaginable flight speed.
A uniquely carbon composite technology efficiently enhance the weak locations and offers streamlined electronics setup.
The servos can be mounted straight onto the frame without mounting nuts.
The rear servo is mounted in-frame for a centralized design and optimal 3D performance.
MX series high performance brushless motor consisted of with heatsink style casing and embedded fan to drastically enhance cooling and boost power output.
Special quick release gyro and receiver install design for quick removal and sturdy attachment.
High precision slant tooth (helical) main equipment for greater load sustainability and lower noise output.
Upgraded tail gear box with greater material quality and easy maintenance.
High quality tail transmission design, combined with updated dual point mounted tail pitch control assembly to lessen slop and boost rudder control precision.
Extremely efficient shaft driven tail system which efficiently minimize power loss discovered on belt driven systems. This also increases performance during flight.
Upgraded 4mm carbon rudder control rod and metal rudder pitch bell crank to additional enhance the rudder locking effect and controllability.
Upgraded style battery mounting platform to enhance the frame along with to provide a mount for the electronic speed controller.
Upgraded lower CG landing equipment style.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stick out.
Finest tail equipment ratio to lessen vibrations brought on by the high speed operations of the main blades, bringing the very best tail locking power.

3GX Programmable Flybarless System Features:

Upgraded 3GX represents the next generation of multi function flybarless systems. The drastically enhanced performance will develop an instant effect on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the marketplace and includes two ports to straight link Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions using the computer setup software directs the user as a result of an action by step setup procedure, allowing for quick setups without leaving out any actions.
With the quickly to be released Bluetooth connection set, the 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, minimizing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to attain the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to provide the perfect feel for novice and advanced pilots.
Customized criteria have actually been developed to allow pilots to tweak numerous swashplate and rudder settings and a settings export function enables customized settings to be shared among good friends.
The 3GX includes the greatest spec gyroscope sensors, enabling it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit drastically improves swashplate and rudder correction precision and will be felt when hovering, along with during aerobatic regimens.
Suitable for 200 to 700 class helicopters, radiance engine or electric powered.
The vibration resistant qualities are evident even when mounted with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a remarkable improvement in stability that matches a flybarred helicopter, while offering explosive dexterity.
With an integrated in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
Rudder control is similar to the luxury GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder action qualities, enabling consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all skill levels to experience the perfect integration between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses an overall of 10 sensors, make sure positioning of the helicopter with exceptional accuracy and offering the ultimate solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Size: 978mm

Tail Rotor Size: 206mm

Motor Drive Gear: 12T

Main Drive Gear: 134T

Autorotation Tail Drive Gear: 145T

Tail Drive Gear: 36T

Drive Gear Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Load 2600 ~ 4600mAh (3300mAh recommended)
Digital Pitch Gauge