Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This amazing bundle includes not just the T-REX 500 PRO Package, but also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the incredible 3GX Programmable Flybarless System. This extremely combo provides you with an unbelievable helicopter set and an equally impressive electronic bundle all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is equipped with an exceptionally low CG design to effectively lower wind resistance throughout flight and supply the most direct and exact control feel back to the pilot, providing exhilarating 3D efficiency and unimaginable flight speed.
A uniquely carbon composite technology effectively strengthen the weak areas and offers streamlined electronic devices setup.
The servos can be mounted straight onto the frame without mounting nuts.
The rear servo is mounted in-frame for a central design and optimal 3D efficiency.
MX series high performance brushless motor included with heatsink style casing and ingrained fan to drastically enhance cooling and increase power output.
Unique fast release gyro and receiver install design for fast elimination and tough attachment.
High precision slant tooth (helical) main equipment for greater load sustainability and lower sound output.
Redesigned tail transmission with greater material quality and simple upkeep.
High quality tail transmission design, integrated with upgraded dual point mounted tail pitch control assembly to lessen slop and increase rudder control precision.
Extremely efficient shaft driven tail system which effectively lower power loss discovered on belt driven systems. This also increases efficiency throughout flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to additional enhance the rudder locking impact and controllability.
Redesigned style battery mounting platform to strengthen the frame as well as to supply an install for the electronic speed controller.
Redesigned lower CG landing equipment style.
Styled aerodynamically canopy for the supreme fit, making the helicopter stick out.
Best tail equipment ratio to lessen vibrations triggered by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will create an instant effect on any lovers.
The 3GX is currently the smallest and lightest flybarless system on the market and includes two ports to straight link Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup simply in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines using the computer setup software application directs the user as a result of a step by step setup procedure, allowing for quick setups without leaving out any actions.
With the soon to be released Bluetooth connectivity set, the 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps allowing live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, decreasing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, allowing pilots to accomplish the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to supply the ideal feel for newbie and advanced pilots.
Customized parameters have actually been developed to enable pilots to fine tune many swashplate and rudder settings and a settings export function permits customized settings to be shared among good friends.
The 3GX includes the greatest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit drastically enhances swashplate and rudder correction precision and will be felt when hovering, as well as throughout aerobatic regimens.
Ideal for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant attributes are evident even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The outcome is a dramatic improvement in stability that rivals a flybarred helicopter, while providing explosive agility.
With a built in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control is similar to the high end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder reaction attributes, allowing consistent rudder feel even under high speed conditions. This exceptional control feel will enable pilots of all skill levels to experience the ideal integration between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system makes use of an overall of 10 sensors, guarantee positioning of the helicopter with exceptional accuracy and providing the supreme solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Size: 978mm

Tail Rotor Size: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Pack 2600 ~ 4600mAh (3300mAh advised)
Digital Pitch Gauge