Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This incredible bundle includes not only the T-REX 500 PRO Package, but also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the amazing 3GX Programmable Flybarless System. This extremely combination offers you with an amazing helicopter kit and a similarly excellent electronic bundle all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is equipped with an exceptionally low CG design to successfully reduce wind resistance throughout flight and provide the most direct and accurate control feel back to the pilot, supplying exciting 3D performance and inconceivable flight speed.
A uniquely carbon composite innovation successfully strengthen the weak locations and provides simplified electronics setup.
The servos can be mounted straight onto the frame without mounting nuts.
The rear servo is mounted in-frame for a centralized design and optimum 3D performance.
MX series high performance brushless motor included with heatsink style casing and embedded fan to considerably enhance cooling and increase power output.
Distinct quick release gyro and receiver install design for quick elimination and sturdy accessory.
High accuracy slant tooth (helical) main equipment for higher load sustainability and lower sound output.
Redesigned tail transmission with higher material quality and simple upkeep.
High quality tail transmission design, combined with updated double point mounted tail pitch control assembly to decrease slop and increase rudder control accuracy.
Highly effective shaft driven tail system which successfully reduce power loss found on belt driven systems. This also increases performance throughout flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to further enhance the rudder locking impact and controllability.
Redesigned style battery mounting platform to strengthen the frame in addition to to provide an install for the electronic speed controller.
Redesigned lower CG landing equipment style.
Styled aerodynamically canopy for the supreme fit, making the helicopter stick out.
Finest tail equipment ratio to decrease vibrations triggered by the high speed operations of the main blades, bringing the very best tail locking power.

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The considerably enhanced performance will produce an immediate influence on any lovers.
The 3GX is currently the tiniest and lightest flybarless system on the market and includes 2 ports to straight connect Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines using the computer system setup software application directs the user through a step by action setup procedure, allowing for fast setups without omitting any steps.
With the quickly to be released Bluetooth connection kit, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to achieve the most optimum setup for their helicopter without the uncertainty.
3 levels of flight mode are available to provide the ideal feel for newbie and advanced pilots.
Custom-made criteria have been developed to permit pilots to tweak numerous swashplate and rudder settings and a settings export feature allows customized settings to be shared amongst pals.
The 3GX includes the highest spec gyroscope sensing units, enabling it to be used in the harshest conditions. The double axis plus rudder sensing unit considerably improves swashplate and rudder correction accuracy and will be felt when hovering, in addition to throughout aerobatic routines.
Appropriate for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant qualities are evident even when mounted with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The result is a dramatic enhancement in stability that matches a flybarred helicopter, while supplying explosive dexterity.
With a built in pirouette compensation function, the 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with accuracy.
Rudder control is similar to the high end GP-780 gyro in that the rudder level of sensitivity is optimized for the helicopter's rudder reaction qualities, enabling consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all skill levels to experience the ideal combination in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensing units, guarantee positioning of the helicopter with exceptional precision and supplying the supreme option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support as much as 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Size: 978mm

Tail Rotor Size: 206mm

Motor Drive Gear: 12T

Main Drive Gear: 134T

Autorotation Tail Drive Gear: 145T

Tail Drive Gear: 36T

Drive Gear Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Load 2600 ~ 4600mAh (3300mAh suggested)
Digital Pitch Gauge