Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This incredible bundle includes not only the T-REX 500 PRO Package, but also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, three DS515M cyclic servos, one DS525M tail servo and lastly the fantastic 3GX Programmable Flybarless System. This very combo supplies you with an amazing helicopter package and a similarly impressive electronic bundle all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is equipped with a very low CG design to successfully lower wind resistance during flight and supply the most direct and precise control feel back to the pilot, supplying exhilarating 3D efficiency and unimaginable flight speed.
A uniquely carbon composite innovation successfully enhance the weak areas and provides streamlined electronics installation.
The servos can be installed directly onto the frame without mounting nuts.
The rear servo is installed in-frame for a central design and ideal 3D efficiency.
MX series high effectiveness brushless motor consisted of with heatsink style housing and ingrained fan to significantly enhance cooling and increase power output.
Special quick release gyro and receiver install design for quick removal and tough attachment.
High accuracy slant tooth (helical) main equipment for greater load sustainability and lower sound output.
Redesigned tail gear box with greater material quality and simple upkeep.
High quality tail transmission design, combined with upgraded dual point installed tail pitch control assembly to lessen slop and increase rudder control accuracy.
Extremely efficient shaft driven tail system which successfully lower power loss found on belt driven systems. This also increases efficiency during flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to additional enhance the rudder locking impact and controllability.
Redesigned style battery mounting platform to enhance the frame as well as to supply an install for the electronic speed controller.
Redesigned lower CG landing equipment style.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.
Best tail equipment ratio to lessen vibrations brought on by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The significantly improved efficiency will create an immediate effect on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and includes two ports to directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines using the computer setup software directs the user through an action by step setup process, permitting fast setups without leaving out any actions.
With the quickly to be launched Bluetooth connection package, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, lowering electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to accomplish the most ideal setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to supply the perfect feel for newbie and advanced pilots.
Customized specifications have actually been established to allow pilots to tweak numerous swashplate and rudder settings and a settings export feature allows custom-made settings to be shared amongst good friends.
The 3GX includes the greatest spec gyroscope sensors, enabling it to be utilized in the harshest conditions. The dual axis plus rudder sensor significantly improves swashplate and rudder correction accuracy and will be felt when hovering, as well as during aerobatic routines.
Appropriate for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant characteristics appear even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The outcome is a dramatic enhancement in stability that equals a flybarred helicopter, while supplying explosive agility.
With an integrated in pirouette compensation function, the 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily performed with accuracy.
Rudder control resembles the high end GP-780 gyro in that the rudder level of sensitivity is optimized for the helicopter's rudder reaction characteristics, enabling constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all skill levels to experience the perfect combination in between the 3GX and the helicopter.
Extra peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensors, make sure positioning of the helicopter with superior accuracy and supplying the ultimate solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Gear: 12T

Main Drive Gear: 134T

Autorotation Tail Drive Gear: 145T

Tail Drive Gear: 36T

Drive Gear Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Load 2600 ~ 4600mAh (3300mAh advised)
Digital Pitch Gauge