Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combination Helicopter Set. This incredible bundle includes not just the T-REX 500 PRO Set, but also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, three DS515M cyclic servos, one DS525M tail servo and lastly the remarkable 3GX Programmable Flybarless System. This very combination offers you with an unbelievable helicopter package and a similarly excellent electronic bundle all in one box.

T-REX 500 PRO Includes: The Align 500 PRO DFC helicopter is geared up with a very low CG design to effectively decrease wind resistance throughout flight and provide the most direct and accurate control feel back to the pilot, offering exhilarating 3D efficiency and unimaginable flight speed.
A uniquely carbon composite technology effectively reinforce the weak locations and offers streamlined electronic devices setup.
The servos can be installed straight onto the frame without installing nuts.
The rear servo is installed in-frame for a centralized design and ideal 3D efficiency.
MX series high efficiency brushless motor consisted of with heatsink design casing and ingrained fan to considerably improve cooling and boost power output.
Unique quick release gyro and receiver mount design for quick elimination and tough accessory.
High precision slant tooth (helical) primary gear for higher load sustainability and lower sound output.
Redesigned tail gear box with higher material quality and easy maintenance.
High quality tail gearbox design, integrated with upgraded double point installed tail pitch control assembly to decrease slop and boost rudder control precision.
Highly effective shaft driven tail system which effectively decrease power loss found on belt driven systems. This also increases efficiency throughout flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to more improve the rudder locking result and controllability.
Redesigned design battery installing platform to reinforce the frame in addition to to provide a mount for the electronic speed controller.
Redesigned lower CG landing gear design.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stand apart.
Best tail gear ratio to decrease vibrations brought on by the high speed operations of the primary blades, bringing the very best tail locking power.

3GX Programmable Flybarless System Includes:

Redesigned 3GX represents the next generation of multi function flybarless systems. The considerably enhanced efficiency will produce an instant impact on any enthusiasts.
The 3GX is presently the tiniest and lightest flybarless system on the market and features 2 ports to straight link Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions utilizing the computer setup software application directs the user as a result of an action by step setup procedure, allowing for quick setups without leaving out any actions.
With the soon to be released Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, decreasing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to achieve the most ideal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to provide the ideal feel for beginner and advanced pilots.
Custom-made criteria have actually been established to allow pilots to fine tune various swashplate and rudder settings and a settings export function allows customized settings to be shared among friends.
The 3GX features the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The double axis plus rudder sensor considerably enhances swashplate and rudder correction precision and will be felt when hovering, in addition to throughout aerobatic regimens.
Ideal for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant attributes are evident even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The result is a remarkable enhancement in stability that equals a flybarred helicopter, while offering explosive dexterity.
With a built in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
Rudder control resembles the high end GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder response attributes, enabling constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all skill levels to experience the ideal combination in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses an overall of 10 sensors, make sure positioning of the helicopter with superior precision and offering the ultimate solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognition

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V 

Consists of: (1) T-REX 500 PRO DFC Set
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Load 2600 ~ 4600mAh (3300mAh recommended)
Digital Pitch Gauge