JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser (Align RH50E01X | AGNRH50E01X)

Model: Align RH50E01X
Dist. #: AGNRH50E01X   SKU: AGNRH50E01X

Be the first to review this product. (Write Review)

Out of stock

Price:  $861.59

This item will earn you 862 reward point(s).
862 points = $17.24 off your next order. Learn More

Updated on Feb 13, 2025 06:20:24 AM

T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser...
This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This incredible package consists of not just the T-REX 500 PRO Package, however likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and finally the remarkable 3GX Programmable Flybarless System. This super combination offers you with an unbelievable helicopter kit and an equally outstanding electronic package all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is geared up with a very low CG design to effectively minimize wind resistance throughout flight and supply the most direct and exact control feel back to the pilot, supplying exciting 3D performance and inconceivable flight speed.
A uniquely carbon composite technology effectively enhance the weak locations and offers streamlined electronic devices setup.
The servos can be installed directly onto the frame without mounting nuts.
The rear servo is installed in-frame for a central design and optimum 3D performance.
MX series high effectiveness brushless motor consisted of with heatsink style case and ingrained fan to considerably enhance cooling and boost power output.
Special quick release gyro and receiver mount design for quick elimination and tough accessory.
High accuracy slant tooth (helical) main equipment for higher load sustainability and lower noise output.
Redesigned tail transmission with higher material quality and easy upkeep.
High quality tail gearbox design, integrated with upgraded double point installed tail pitch control assembly to minimize slop and boost rudder control accuracy.
Extremely efficient shaft driven tail system which effectively minimize power loss found on belt driven systems. This likewise increases performance throughout flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to further enhance the rudder locking result and controllability.
Redesigned style battery mounting platform to enhance the frame in addition to to supply an install for the electronic speed controller.
Redesigned lower CG landing equipment style.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.
Best tail equipment ratio to minimize vibrations brought on by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The considerably enhanced performance will produce an instant effect on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the market and includes 2 ports to directly link Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup simply in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions using the computer system setup software application directs the user through a step by step setup process, enabling fast setups without leaving out any actions.
With the quickly to be launched Bluetooth connection kit, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to attain the most optimum setup for their helicopter without the uncertainty.
3 levels of flight mode are available to supply the perfect feel for newbie and advanced pilots.
Custom parameters have been established to enable pilots to fine tune numerous swashplate and rudder settings and a settings export function enables customized settings to be shared amongst good friends.
The 3GX includes the highest spec gyroscope sensing units, enabling it to be utilized in the harshest conditions. The double axis plus rudder sensor considerably enhances swashplate and rudder correction accuracy and will be felt when hovering, in addition to throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, radiance engine or electrical powered.
The vibration resistant characteristics are evident even when installed with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The result is a remarkable enhancement in stability that matches a flybarred helicopter, while supplying explosive dexterity.
With an integrated in pirouette payment function, the 3GX is able to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
Rudder control resembles the high end GP-780 gyro because the rudder level of sensitivity is enhanced for the helicopter's rudder response characteristics, enabling consistent rudder feel even under high speed conditions. This outstanding control feel will enable pilots of all skill levels to experience the perfect combination in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes a total of 10 sensing units, ensure positioning of the helicopter with superior precision and supplying the ultimate option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognition

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Size: 978mm

Tail Rotor Size: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Pack 2600 ~ 4600mAh (3300mAh recommended)
Digital Pitch Gauge
X-Plosion Parts Finder Click Below For Parts Explosions For Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

Frequently Purchased Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser Parts

Visual Parts Finder