Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combination Helicopter Kit. This unbelievable plan consists of not only the T-REX 500 PRO Kit, but likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the remarkable 3GX Programmable Flybarless System. This very combination offers you with an unbelievable helicopter package and an equally remarkable electronic plan all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is equipped with a very low CG design to efficiently minimize wind resistance during flight and provide the most direct and exact control feel back to the pilot, offering thrilling 3D efficiency and inconceivable flight speed.
A uniquely carbon composite innovation efficiently enhance the weak locations and provides streamlined electronics installation.
The servos can be mounted straight onto the frame without mounting nuts.
The rear servo is mounted in-frame for a central design and optimal 3D efficiency.
MX series high effectiveness brushless motor included with heatsink style housing and ingrained fan to drastically enhance cooling and boost power output.
Distinct fast release gyro and receiver install design for fast elimination and sturdy accessory.
High accuracy slant tooth (helical) main equipment for greater load sustainability and lower sound output.
Redesigned tail gear box with greater material quality and simple upkeep.
High quality tail transmission design, integrated with upgraded double point mounted tail pitch control assembly to reduce slop and boost rudder control accuracy.
Extremely efficient shaft driven tail system which efficiently minimize power loss found on belt driven systems. This likewise increases efficiency during flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to more enhance the rudder locking effect and controllability.
Redesigned style battery mounting platform to enhance the frame along with to provide a mount for the electronic speed controller.
Redesigned lower CG landing equipment style.
Styled aerodynamically canopy for the supreme fit, making the helicopter stand out.
Best tail equipment ratio to reduce vibrations triggered by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will produce an instant effect on any lovers.
The 3GX is presently the tiniest and lightest flybarless system on the market and includes two ports to straight link Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions utilizing the computer system setup software directs the user as a result of an action by action setup process, enabling fast setups without leaving out any actions.
With the quickly to be released Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, allowing pilots to accomplish the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to provide the perfect feel for newbie and advanced pilots.
Customized specifications have been established to permit pilots to fine tune many swashplate and rudder settings and a settings export function enables customized settings to be shared amongst friends.
The 3GX includes the highest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The double axis plus rudder sensing unit drastically improves swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic regimens.
Appropriate for 200 to 700 class helicopters, radiance engine or electric powered.
The vibration resistant qualities appear even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The result is a dramatic improvement in stability that measures up to a flybarred helicopter, while offering explosive agility.
With an integrated in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily performed with accuracy.
Rudder control is similar to the high-end GP-780 gyro because the rudder level of sensitivity is enhanced for the helicopter's rudder response qualities, allowing consistent rudder feel even under high speed conditions. This excellent control feel will permit pilots of all skill levels to experience the perfect integration in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes a total of 10 sensors, make sure positioning of the helicopter with exceptional accuracy and offering the supreme solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type recognition

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Consists of: (1) T-REX 500 PRO DFC Kit
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Load 2600 ~ 4600mAh (3300mAh recommended)
Digital Pitch Gauge