Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which presented an ingenious design and came equipped with high-end electronic devices. Align's many anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a beginner or a professional, the brand brand-new T-REX 470L will provide you the brand-new flying feel once again.

470EFL Main Rotor Head provides exceptional flight stability and uses a lower CG design to lower flying resistance while supplying a more stiff and quick rotor head reaction. To enhance the strength and durability of the primary and feathering shaft the 470 primary shaft outer measurement was increased from Ø5mm to Ø6mm, while the feathering shaft outer measurement was increased from Ø4mm to Ø5mm. The 470L has adopt a high basic 1.2mm 3K carbon fiber primary frame and a wider body design which increases the size of the battery compartment allowing the usage of bigger capability battery. The 470L makes use of a high effective belt drive assembly design with an ingenious adjustable belt guide pulley-block, supplying a practical way to change the belt stress by releasing or tightening up the screw. This screw is utilized to keep optimum belt stress improving the life of the belt and lowering keeps costs. The landing skid is tilted 5 degrees forward to enhance crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is equipped with the big outer diameter 470MX motor(1800KV/2818) which is extremely effective supplying exceptional power, exceptional torque, improved current draw, and a lower operating temperature which are exceptional improvements as compared to the 460MX motor. The brand brand-new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based upon servo requirements. The brand-new high-end electronic devices effectively improve flight performance.

Extended 380mm primary blades effectively enhance the flying stability and power efficiency. The brand-new engineered airfoil design effectively decreases turbulence at the end of the primary blades,this saves power usage throughout severe 3D flight. New 69 size tail blades are longer in length and deal exceptional tail holding efficiency, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head provides exceptional flight stability and uses a lower CG design to lower flying resistance while supplying a more stiff and quick rotor head reaction. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft outer measurement increased from Ø4mm to Ø5mm,effectively enhancing the Main and Feathering Shaft while improving durability.

New 470MX motor functions; high efficiency, exceptional power, exceptional torque, low current draw, and a low operating temperature. The 470MX can preserving consistent torque and head speed through constant 3D maneuvers. 470MX motor is created for 3D flight.

New Swashplate design with zero slop providing an exact and precise regulated flight.

>Produced using the current composite innovation to embed brass inserts into primary shaft bearing block, which improve the structure integrety and strength. You can feel the strong structure even in severe 3D flight.

Carbon fiber side frame plates are produced using a proprietary composite material combination innovation which integrates the battery installing rails into the frame. This distinct usage of open areas within the frame produces a stiff frame and is visually pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

Brand brand-new latching battery tray which makes use of incorporated installing rails inside the frames to simplify insertion / elimination of battery while supplying protection for the battery.

Specially created for T-REX 470 supplying greater currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for exceptional responsiveness, severe torque, and improved performance.

Innovative adjustable belt guide pulley-block, enables a practical way to change the belt stress by releasing or tightening up the screw. The screw is utilized to keep optimum belt stress over time.

The One Way Bearing is produced using bearing steal and after heat treatment the solidity is HRC50-55. This bigger bearing has a higher load carry capability which decreases the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The brand-new primary equipment case and all-metal main pulley-block transmission system is an efficient design to provide the ultimate performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

Newly created vertical tail servo mount to enhance CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength.

Designed using a proprietary material combination innovation which produces a unique appearance and enhances the Vertical Stabilizer's stiffness.

The newly created dual point supported tail control assembly provides slop complimentary efficiency while improving rudder resolution and precision.

The brand-new tail rotor holder design consists of thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail efficiency when using 69 size Tail Blades.

 Standard devices

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Specification:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Size: 850mm
.Tail Rotor Size: 181mm
.Motor Pinion Gear: 11T
.Main Drive Gear: 121T
.Main Drive Wheel: 56T
.Tail Drive Gear: 15T
.Drive Gear Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L BOSS Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1