Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which presented an innovative style and came equipped with high-end electronic equipment. Align's many prepared for helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or an expert, the brand new T-REX 470L will offer you the new flying feel again.

470EFL Main Rotor Head offers exceptional flight stability and uses a lower CG style to reduce flying resistance while supplying a more rigid and quick rotor head action. To enhance the strength and toughness of the main and feathering shaft the 470 main shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a larger body style which increases the size of the battery compartment allowing the use of bigger capability battery. The 470L makes use of a high efficient belt drive assembly style with an innovative adjustable belt guide pulley-block, supplying a hassle-free method to change the belt stress by releasing or tightening the screw. This screw is used to preserve optimum belt stress enhancing the life of the belt and reducing keeps costs. The landing skid is tilted 5 degrees forward to enhance crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is equipped with the large external size 470MX motor(1800KV/2818) which is extremely efficient supplying exceptional power, exceptional torque, improved existing draw, and a lower operating temperature level which are exceptional improvements as compared to the 460MX motor. The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, enhancing the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC offers 5.0V to 8.4V which can be set based upon servo specification. The new high-end electronic devices efficiently improve flight performance.

Extended 380mm main blades efficiently enhance the flying stability and power efficiency. The new engineered airfoil style efficiently minimizes turbulence at the end of the main blades,this conserves power consumption during extreme 3D flight. New 69 size tail blades are longer in length and deal exceptional tail holding efficiency, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head offers exceptional flight stability and uses a lower CG style to reduce flying resistance while supplying a more rigid and quick rotor head action. Brand Name New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,efficiently enhancing the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high effectiveness, exceptional power, exceptional torque, low existing draw, and a low operating temperature level. The 470MX is capable of keeping consistent torque and head speed through constant 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate style with zero slop delivering a precise and precise controlled flight.

>Produced utilizing the current composite innovation to embed brass inserts into main shaft bearing block, which improve the structure integrety and strength. You can feel the strong structure even in extreme 3D flight.

Carbon fiber side frame plates are made utilizing an exclusive composite product integration innovation which integrates the battery mounting rails into the frame. This distinct use of open areas within the frame develops a stiff frame and is visually pleasing.

An additional 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

Brand new locking battery tray which makes use of incorporated mounting rails inside the frames to simplify insertion / removal of battery while supplying protection for the battery.

Specially designed for T-REX 470 supplying greater currency output and assistance for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for exceptional responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide pulley-block, allows a hassle-free method to change the belt stress by releasing or tightening the screw. The screw is used to preserve optimum belt stress over time.

The One Method Bearing is made utilizing bearing steal and after heat treatment the firmness is HRC50-55. This bigger bearing has a higher load bring capability which minimizes the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal main pulley-block transmission system is an effective style to provide the ultimate performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

Newly designed vertical tail servo install to enhance CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to improves the torsional strength.

Designed utilizing an exclusive product integration innovation which develops a unique look and improves the Vertical Stabilizer's stiffness.

The freshly designed dual point supported tail control assembly delivers slop complimentary efficiency while enhancing rudder resolution and precision.

The new tail rotor holder style includes thrust bearings which increases toughness, in addition to considerably enhancing the accuracy and effectiveness of the tail efficiency when utilizing 69 size Tail Blades.

 Standard equipment

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Spec:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Size: 850mm
.Tail Rotor Size: 181mm
.Motor Pinion Gear: 11T
.Main Drive Gear: 121T
.Main Drive Pulley: 56T
.Tail Drive Gear: 15T
.Drive Gear Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L DOMINATOR Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1