Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which introduced an innovative style and came geared up with high-end electronic equipment. Align's most expected helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand brand-new T-REX 470L will offer you the brand-new flying feel again.

470EFL Main Rotor Head supplies superior flight stability and uses a lower CG style to reduce flying resistance while offering a more rigid and quick rotor head action. To enhance the strength and resilience of the primary and feathering shaft the 470 primary shaft outer dimension was increased from Ø5mm to Ø6mm, while the feathering shaft outer dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high standard 1.2mm 3K carbon fiber primary frame and a larger body style which increases the size of the battery compartment permitting the use of larger capability battery. The 470L utilizes a high effective belt drive assembly style with an innovative adjustable belt guide pulley-block, offering a convenient way to change the belt tension by releasing or tightening the screw. This screw is utilized to keep optimum belt tension enhancing the life of the belt and decreasing keeps expenses. The landing skid is tilted 5 degrees forward to enhance crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is geared up with the big outer size 470MX motor(1800KV/2818) which is extremely effective offering superior power, outstanding torque, improved current draw, and a lower operating temperature level which are outstanding enhancements as compared to the 460MX motor. The brand brand-new DS450 digital cyclic servos and DS455 digital tail servo, support as much as V8.4, high voltage input, enhancing the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC supplies 5.0V to 8.4V which can be set based on servo spec. The brand-new high-end electronic devices effectively enhance flight performance.

Extended 380mm primary blades effectively enhance the flying stability and power efficiency. The brand-new crafted airfoil style effectively decreases turbulence at the end of the primary blades,this conserves power consumption during severe 3D flight. New 69 size tail blades are longer in length and deal superior tail holding efficiency, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head supplies superior flight stability and uses a lower CG style to reduce flying resistance while offering a more rigid and quick rotor head action. Brand Name New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft outer dimension increased from Ø4mm to Ø5mm,effectively strengthening the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high performance, superior power, outstanding torque, low current draw, and a low operating temperature level. The 470MX can preserving consistent torque and head speed through continuous 3D maneuvers. 470MX motor is created for 3D flight.

New Swashplate style with zero slop delivering a precise and precise regulated flight.

>Manufactured using the current composite technology to embed brass inserts into primary shaft bearing block, which enhance the structure integrety and strength. You can feel the solid structure even in severe 3D flight.

Carbon fiber side frame plates are produced using a proprietary composite material integration technology which incorporates the battery installing rails into the frame. This special use of open areas within the frame creates a rigid frame and is aesthetically pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

Brand brand-new locking battery tray which utilizes incorporated installing rails inside the frames to streamline insertion / removal of battery while offering protection for the battery.

Specially created for T-REX 470 offering greater currency output and assistance for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support as much as 8.4V for superior responsiveness, severe torque, and improved performance.

Innovative adjustable belt guide pulley-block, allows a convenient way to change the belt tension by releasing or tightening the screw. The screw is utilized to keep optimum belt tension over time.

The One Method Bearing is produced using bearing take and after heat treatment the hardness is HRC50-55. This larger bearing has a greater load bring capability which decreases the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The brand-new primary equipment case and all-metal main pulley-block transmission system is an effective style to deliver the supreme performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

Newly created vertical tail servo install to enhance CG while increasing the responsiveness of 3D flight.

A broader Tail Boom to enhances the torsional strength.

Designed using a proprietary material integration technology which creates a unique appearance and enhances the Vertical Stabilizer's stiffness.

The newly created dual point supported tail control assembly provides slop totally free efficiency while enhancing rudder resolution and precision.

The brand-new tail rotor holder style consists of thrust bearings which increases resilience, along with considerably enhancing the accuracy and performance of the tail efficiency when using 69 size Tail Blades.

 Basic equipment

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Requirements:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Size: 850mm
.Tail Rotor Size: 181mm
.Motor Pinion Gear: 11T
.Main Drive Gear: 121T
.Main Drive Wheel: 56T
.Tail Drive Gear: 15T
.Drive Gear Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L DOMINATOR Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1