Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which introduced an ingenious style and came equipped with high-end electronic devices. Align's a lot of anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or an expert, the brand name new T-REX 470L will offer you the new flying feel again.

470EFL Main Rotor Head offers superior flight stability and provides a lower CG style to minimize flying resistance while supplying a more stiff and quick rotor head action. To improve the strength and resilience of the primary and feathering shaft the 470 primary shaft outer measurement was increased from Ø5mm to Ø6mm, while the feathering shaft outer measurement was increased from Ø4mm to Ø5mm. The 470L has embrace a high basic 1.2mm 3K carbon fiber primary frame and a wider body style which increases the size of the battery compartment allowing the usage of bigger capability battery. The 470L uses a high efficient belt drive assembly style with an ingenious adjustable belt guide pulley, supplying a convenient method to change the belt tension by launching or tightening the screw. This screw is used to keep ideal belt tension improving the life of the belt and reducing maintains expenses. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is equipped with the big outer diameter 470MX motor(1800KV/2818) which is extremely efficient supplying superior power, excellent torque, enhanced present draw, and a lower operating temperature level which are excellent improvements as compared to the 460MX motor. The brand name new DS450 digital cyclic servos and DS455 digital tail servo, support approximately V8.4, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC offers 5.0V to 8.4V which can be set based on servo requirements. The new high-end electronics efficiently enhance flight performance.

Extended 380mm primary blades efficiently improve the flying stability and power efficiency. The new crafted airfoil style efficiently decreases turbulence at the end of the primary blades,this conserves power consumption during severe 3D flight. New 69 size tail blades are longer in length and deal superior tail holding efficiency, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head offers superior flight stability and provides a lower CG style to minimize flying resistance while supplying a more stiff and quick rotor head action. Brand Name New 470 Main Shaft and Feathering Shaft: Main Shaft outer measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft outer measurement increased from Ø4mm to Ø5mm,efficiently reinforcing the Main and Feathering Shaft while improving durability.

New 470MX motor features; high performance, superior power, excellent torque, low present draw, and a low operating temperature level. The 470MX is capable of maintaining consistent torque and head speed through constant 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate style with no slop delivering a precise and precise regulated flight.

>Produced utilizing the current composite technology to embed brass inserts into primary shaft bearing block, which enhance the structure integrety and strength. You can feel the solid structure even in severe 3D flight.

Carbon fiber side frame plates are manufactured utilizing a proprietary composite material combination technology which integrates the battery mounting rails into the frame. This distinct usage of open areas within the frame produces a rigid frame and is visually pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

Brand new locking battery tray which uses incorporated mounting rails inside the frames to simplify insertion / elimination of battery while supplying protection for the battery.

Specially developed for T-REX 470 supplying greater currency output and assistance for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support approximately 8.4V for superior responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide pulley, allows a convenient method to change the belt tension by launching or tightening the screw. The screw is used to keep ideal belt tension over time.

The One Way Bearing is manufactured utilizing bearing steal and after heat treatment the hardness is HRC50-55. This bigger bearing has a greater load bring capability which decreases the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The new primary equipment case and all-metal main pulley transmission system is an efficient style to deliver the supreme performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

Newly developed vertical tail servo install to improve CG while increasing the responsiveness of 3D flight.

A wider Tail Boom to enhances the torsional strength.

Designed utilizing a proprietary material combination technology which produces a unique look and enhances the Vertical Stabilizer's stiffness.

The freshly developed double point supported tail control assembly delivers slop free efficiency while improving rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases resilience, in addition to considerably improving the accuracy and performance of the tail efficiency when utilizing 69 size Tail Blades.

 Standard devices

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Specification:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Diameter: 850mm
.Tail Rotor Diameter: 181mm
.Motor Pinion Equipment: 11T
.Main Drive Equipment: 121T
.Main Drive Sheave: 56T
.Tail Drive Equipment: 15T
.Drive Equipment Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L BOSS Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1