Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which introduced an ingenious style and came geared up with high-end electronic equipment. Align's the majority of expected helicopter release in 2016 the T-REX 470L is born. No matter whether you are a beginner or an expert, the brand name brand-new T-REX 470L will give you the brand-new flying feel once again.

470EFL Main Rotor Head offers superior flight stability and provides a lower CG style to reduce flying resistance while supplying a more stiff and quick rotor head action. To improve the strength and sturdiness of the primary and feathering shaft the 470 primary shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high standard 1.2mm 3K carbon fiber primary frame and a larger body style which increases the size of the battery compartment permitting the use of larger capability battery. The 470L makes use of a high effective belt drive assembly style with an ingenious adjustable belt guide sheave, supplying a practical way to adjust the belt tension by launching or tightening up the screw. This screw is used to preserve optimal belt tension improving the life of the belt and reducing preserves expenses. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is geared up with the big external size 470MX motor(1800KV/2818) which is highly effective supplying superior power, exceptional torque, enhanced present draw, and a lower operating temperature level which are exceptional improvements as compared to the 460MX motor. The brand name brand-new DS450 digital cyclic servos and DS455 digital tail servo, support as much as V8.4, high voltage input, improving the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC offers 5.0V to 8.4V which can be set based upon servo requirements. The brand-new high-end electronic devices effectively boost flight performance.

Extended 380mm primary blades effectively improve the flying stability and power efficiency. The brand-new engineered airfoil style effectively lowers turbulence at the end of the primary blades,this conserves power intake during extreme 3D flight. New 69 size tail blades are longer in length and offer superior tail holding efficiency, even during requiring 3D flight.

Brand New 470EFL Main Rotor Head offers superior flight stability and provides a lower CG style to reduce flying resistance while supplying a more stiff and quick rotor head action. Brand Name New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,effectively reinforcing the Main and Feathering Shaft while improving durability.

New 470MX motor features; high effectiveness, superior power, exceptional torque, low present draw, and a low operating temperature level. The 470MX can preserving constant torque and head speed through continuous 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate style with zero slop providing a precise and accurate regulated flight.

>Produced utilizing the current composite innovation to embed brass inserts into primary shaft bearing block, which boost the structure integrety and strength. You can feel the strong structure even in extreme 3D flight.

Carbon fiber side frame plates are manufactured utilizing an exclusive composite product combination innovation which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame develops a rigid frame and is aesthetically pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

Brand brand-new latching battery tray which makes use of integrated mounting rails inside the frames to streamline insertion / elimination of battery while supplying protection for the battery.

Specially developed for T-REX 470 supplying greater currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support as much as 8.4V for superior responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide sheave, allows a practical way to adjust the belt tension by launching or tightening up the screw. The screw is used to preserve optimal belt tension over time.

The One Method Bearing is manufactured utilizing bearing steal and after heat treatment the hardness is HRC50-55. This larger bearing has a higher load carry capability which lowers the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The brand-new primary gear case and all-metal main sheave transmission system is an efficient style to deliver the supreme performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

Newly developed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to improves the torsional strength.

Designed utilizing an exclusive product combination innovation which develops a unique look and improves the Vertical Stabilizer's stiffness.

The newly developed double point supported tail control assembly provides slop totally free efficiency while improving rudder resolution and precision.

The brand-new tail rotor holder style consists of thrust bearings which increases sturdiness, in addition to considerably improving the accuracy and effectiveness of the tail efficiency when utilizing 69 size Tail Blades.

 Standard equipment

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Spec:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Size: 850mm
.Tail Rotor Size: 181mm
.Motor Pinion Equipment: 11T
.Main Drive Equipment: 121T
.Main Drive Sheave: 56T
.Tail Drive Equipment: 15T
.Drive Equipment Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L DOMINATOR Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1