Align T-REX 470LM KIT (w/ Motor and ESC)

Following the release of the T-REX 450L, which introduced an ingenious design and came equipped with high-end electronic devices. Align's most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a beginner or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head supplies exceptional flight stability and provides a lower CG design to lower flying resistance while supplying a more stiff and fast rotor head response. To improve the strength and sturdiness of the main and feathering shaft the 470 main shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high basic 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment permitting the use of larger capability battery. The 470L utilizes a high efficient belt drive assembly design with an ingenious adjustable belt guide sheave, supplying a hassle-free method to change the belt stress by launching or tightening the screw. This screw is used to maintain optimal belt stress enhancing the life of the belt and decreasing preserves expenses. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the big external size 470MX motor (1800KV) which is extremely efficient supplying exceptional power, excellent torque, improved present draw, and a lower operating temperature which are excellent improvements as compared with the 460MX motor.

Extended 380mm main blades effectively improve the flying stability and power performance. The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power usage throughout severe 3D flight. New 69 size tail blades are longer in length and offer exceptional tail holding performance, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head supplies exceptional flight stability and provides a lower CG design to lower flying resistance while supplying a more stiff and fast rotor head response. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,effectively reinforcing the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high performance, exceptional power, excellent torque, low present draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through constant 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate design with no slop providing a precise and accurate regulated flight.

Brand new CNC metal support plate and brace compare to frame installing bolt effectively increase the torsional stength of main frame, under severe 3D maneuver, you can highly feel its solid support from its structure.

Carbon fiber side frame plates are manufactured using a proprietary composite product combination technology which integrates the battery installing rails into the frame. This unique use of open spaces within the frame develops a stiff frame and is aesthetically pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

Brand new latching battery tray which utilizes incorporated installing rails inside the frames to simplify insertion / removal of battery while supplying security for the battery.

Specially developed for T-REX 470 supplying greater currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for exceptional responsiveness, severe torque, and improved performance.

Innovative adjustable belt guide sheave, permits a hassle-free method to change the belt stress by launching or tightening the screw. The screw is used to maintain optimal belt stress over time.

The One Method Bearing is manufactured using bearing steal and after heat treatment the firmness is HRC50-55. This larger bearing has a higher load bring capability which reduces the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal central sheave transmission system is an efficient design to deliver the supreme performance.

Landing skid is tilted 5 degrees forward to improve crashworthiness.

Newly developed vertical tail servo install to improve CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength. Carbon Fiber Tail Control Rod is useful and enhances the helicopters tail control.

Designed using a proprietary product combination technology which develops a unique appearance and enhances the Vertical Stabilizer's stiffness.

The freshly developed double point supported tail control assembly provides slop complimentary performance while enhancing rudder resolution and precision.

The new tail rotor holder design includes thrust bearings which increases sturdiness, in addition to significantly enhancing the accuracy and performance of the tail performance when using 69 size Tail Blades.

Standard devices

?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1

Spec

?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Diameter: 850mm
?Tail Rotor Diameter: 181mm
?Motor Pinion Gear: 11T
?Main Drive Gear: 121T
?Main Drive Pulley-block: 56T
?Tail Drive Gear: 15T
?Drive Gear Ratio: 11:1:3.73
?Weight(w/o battery): 860gAccessories

?T-REX 470L DOMINATOR Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1