Align T-REX 470LM KIT (w/ Motor and ESC)

Following the release of the T-REX 450L, which presented an ingenious design and came geared up with high-end electronic equipment. Align's a lot of anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or an expert, the brand new T-REX 470L will give you the new flying feel once again.

470EFL Main Rotor Head provides remarkable flight stability and offers a lower CG design to decrease flying resistance while supplying a more rigid and fast rotor head response. To enhance the strength and sturdiness of the main and feathering shaft the 470 main shaft outer measurement was increased from Ø5mm to Ø6mm, while the feathering shaft outer measurement was increased from Ø4mm to Ø5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment permitting the usage of bigger capacity battery. The 470L makes use of a high effective belt drive assembly design with an ingenious adjustable belt guide pulley-block, supplying a convenient way to adjust the belt tension by releasing or tightening up the screw. This screw is used to preserve ideal belt tension enhancing the life of the belt and reducing maintains costs. The landing skid is tilted 5 degrees forward to enhance crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is geared up with the big outer diameter 470MX motor (1800KV) which is highly effective supplying remarkable power, outstanding torque, improved current draw, and a lower operating temperature which are outstanding improvements as compared to the 460MX motor.

Extended 380mm main blades effectively enhance the flying stability and power performance. The new crafted airfoil design effectively lowers turbulence at the end of the main blades,this conserves power consumption during severe 3D flight. New 69 size tail blades are longer in length and deal remarkable tail holding performance, even during requiring 3D flight.

Brand New 470EFL Main Rotor Head provides remarkable flight stability and offers a lower CG design to decrease flying resistance while supplying a more rigid and fast rotor head response. Brand name New 470 Main Shaft and Feathering Shaft: Main Shaft outer measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft outer measurement increased from Ø4mm to Ø5mm,effectively enhancing the Main and Feathering Shaft while enhancing durability.

New 470MX motor features; high effectiveness, remarkable power, outstanding torque, low current draw, and a low operating temperature. The 470MX can preserving constant torque and head speed through constant 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate design with zero slop delivering an accurate and accurate controlled flight.

Brand new CNC metal reinforcement plate and brace compare with frame installing bolt effectively increase the torsional stength of main frame, under severe 3D maneuver, you can highly feel its solid reinforcement from its structure.

Carbon fiber side frame plates are made using an exclusive composite product integration innovation which incorporates the battery installing rails into the frame. This special usage of open areas within the frame develops a rigid frame and is aesthetically pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

Brand new locking battery tray which makes use of incorporated installing rails inside the frames to streamline insertion / elimination of battery while supplying security for the battery.

Specially designed for T-REX 470 supplying greater currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support as much as 8.4V for remarkable responsiveness, severe torque, and improved performance.

Innovative adjustable belt guide pulley-block, enables a convenient way to adjust the belt tension by releasing or tightening up the screw. The screw is used to preserve ideal belt tension over time.

The One Method Bearing is made using bearing steal and after heat treatment the solidity is HRC50-55. This bigger bearing has a higher load carry capacity which lowers the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The new main gear case and all-metal central pulley-block transmission system is an effective design to deliver the supreme performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

Newly designed vertical tail servo install to enhance CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength. Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

Designed using an exclusive product integration innovation which develops a unique appearance and enhances the Vertical Stabilizer's stiffness.

The freshly designed double point supported tail control assembly provides slop free performance while enhancing rudder resolution and precision.

The new tail rotor holder design consists of thrust bearings which increases sturdiness, along with significantly enhancing the precision and effectiveness of the tail performance when using 69 size Tail Blades.

Standard equipment

?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1

Spec

?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Size: 850mm
?Tail Rotor Size: 181mm
?Motor Pinion Equipment: 11T
?Main Drive Equipment: 121T
?Main Drive Sheave: 56T
?Tail Drive Equipment: 15T
?Drive Equipment Ratio: 11:1:3.73
?Weight(w/o battery): 860gAccessories

?T-REX 470L BOSS Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1