Align T-REX 470LM KIT (w/ Motor and ESC)

Following the release of the T-REX 450L, which introduced an ingenious design and came geared up with high-end electronic equipment. Align's many anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or a professional, the brand brand-new T-REX 470L will offer you the brand-new flying feel again.

470EFL Main Rotor Head supplies remarkable flight stability and provides a lower CG design to decrease flying resistance while offering a more rigid and fast rotor head action. To improve the strength and sturdiness of the primary and feathering shaft the 470 primary shaft outer measurement was increased from Ø5mm to Ø6mm, while the feathering shaft outer measurement was increased from Ø4mm to Ø5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber primary frame and a wider body design which increases the size of the battery compartment permitting the use of bigger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an ingenious adjustable belt guide wheel, offering a convenient method to change the belt stress by releasing or tightening up the screw. This screw is utilized to maintain optimum belt stress enhancing the life of the belt and decreasing keeps expenses. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is geared up with the big outer diameter 470MX motor (1800KV) which is extremely efficient offering remarkable power, outstanding torque, improved current draw, and a lower operating temperature which are outstanding enhancements as compared with the 460MX motor.

Extended 380mm primary blades effectively improve the flying stability and power efficiency. The brand-new crafted airfoil design effectively reduces turbulence at the end of the primary blades,this conserves power intake throughout extreme 3D flight. New 69 size tail blades are longer in length and deal remarkable tail holding efficiency, even throughout demanding 3D flight.

Brand New 470EFL Main Rotor Head supplies remarkable flight stability and provides a lower CG design to decrease flying resistance while offering a more rigid and fast rotor head action. Brand name New 470 Main Shaft and Feathering Shaft: Main Shaft outer measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft outer measurement increased from Ø4mm to Ø5mm,effectively enhancing the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high efficiency, remarkable power, outstanding torque, low current draw, and a low operating temperature. The 470MX can keeping consistent torque and head speed through constant 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate design with zero slop providing a precise and accurate regulated flight.

Brand brand-new CNC metal reinforcement plate and brace compare to frame installing bolt effectively increase the torsional stength of primary frame, under extreme 3D maneuver, you can highly feel its solid reinforcement from its structure.

Carbon fiber side frame plates are produced using a proprietary composite material integration innovation which integrates the battery installing rails into the frame. This distinct use of open spaces within the frame develops a stiff frame and is aesthetically pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

Brand brand-new latching battery tray which utilizes integrated installing rails inside the frames to simplify insertion / elimination of battery while offering protection for the battery.

Specially designed for T-REX 470 offering greater currency output and assistance for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for remarkable responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide wheel, permits a convenient method to change the belt stress by releasing or tightening up the screw. The screw is utilized to maintain optimum belt stress over time.

The One Method Bearing is produced using bearing take and after heat treatment the firmness is HRC50-55. This bigger bearing has a greater load bring capacity which reduces the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The brand-new primary gear case and all-metal main wheel transmission system is an efficient design to provide the supreme performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

Newly designed vertical tail servo install to improve CG while increasing the responsiveness of 3D flight.

A wider Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is useful and improves the helicopters tail control.

Designed using a proprietary material integration innovation which develops a unique appearance and improves the Vertical Stabilizer's stiffness.

The newly designed double point supported tail control assembly delivers slop complimentary efficiency while enhancing rudder resolution and precision.

The brand-new tail rotor holder design consists of thrust bearings which increases sturdiness, as well as considerably enhancing the precision and efficiency of the tail efficiency when using 69 size Tail Blades.

Standard equipment

?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1

Spec

?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Diameter: 850mm
?Tail Rotor Diameter: 181mm
?Motor Pinion Gear: 11T
?Main Drive Gear: 121T
?Main Drive Wheel: 56T
?Tail Own Gear: 15T
?Own Gear Ratio: 11:1:3.73
?Weight(w/o battery): 860gAccessories

?T-REX 470L BOSS Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1