Align T-REX 470LM KIT (w/ Motor and ESC)

Following the release of the T-REX 450L, which presented an ingenious design and came equipped with high-end electronic equipment. Align's the majority of anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or a professional, the brand name brand-new T-REX 470L will give you the brand-new flying feel again.

470EFL Main Rotor Head offers superior flight stability and provides a lower CG design to lower flying resistance while offering a more rigid and quick rotor head reaction. To enhance the strength and resilience of the main and feathering shaft the 470 main shaft external measurement was increased from Ø5mm to Ø6mm, while the feathering shaft external measurement was increased from Ø4mm to Ø5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a broader body design which increases the size of the battery compartment enabling the use of bigger capacity battery. The 470L makes use of a high effective belt drive assembly design with an ingenious adjustable belt guide wheel, offering a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is utilized to maintain optimal belt tension improving the life of the belt and lowering maintains expenses. The landing skid is tilted 5 degrees forward to enhance crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the big external size 470MX motor (1800KV) which is highly effective offering superior power, excellent torque, enhanced existing draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.

Extended 380mm main blades efficiently enhance the flying stability and power performance. The brand-new crafted airfoil design efficiently decreases turbulence at the end of the main blades,this saves power usage throughout severe 3D flight. New 69 size tail blades are longer in length and offer superior tail holding performance, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head offers superior flight stability and provides a lower CG design to lower flying resistance while offering a more rigid and quick rotor head reaction. Brand name New 470 Main Shaft and Feathering Shaft: Main Shaft external measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft external measurement increased from Ø4mm to Ø5mm,efficiently strengthening the Main and Feathering Shaft while improving durability.

New 470MX motor features; high performance, superior power, excellent torque, low existing draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through constant 3D maneuvers. 470MX motor is created for 3D flight.

New Swashplate design with absolutely no slop delivering an exact and precise controlled flight.

Brand brand-new CNC metal reinforcement plate and brace compare with frame installing bolt efficiently increase the torsional stength of main frame, under severe 3D maneuver, you can strongly feel its strong reinforcement from its structure.

Carbon fiber side frame plates are made utilizing a proprietary composite material integration innovation which incorporates the battery installing rails into the frame. This special use of open spaces within the frame develops a stiff frame and is visually pleasing.

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

Brand brand-new locking battery tray which makes use of integrated installing rails inside the frames to simplify insertion / removal of battery while offering security for the battery.

Specially created for T-REX 470 offering higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support as much as 8.4V for superior responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide wheel, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is utilized to maintain optimal belt tension over time.

The One Method Bearing is made utilizing bearing take and after heat treatment the solidity is HRC50-55. This bigger bearing has a higher load carry capacity which decreases the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The brand-new main gear case and all-metal central wheel transmission system is an efficient design to provide the supreme performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

Newly created vertical tail servo install to enhance CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength. Carbon Fiber Tail Control Rod is useful and enhances the helicopters tail control.

Designed utilizing a proprietary material integration innovation which develops a unique appearance and enhances the Vertical Stabilizer's stiffness.

The recently created dual point supported tail control assembly delivers slop complimentary performance while improving rudder resolution and precision.

The brand-new tail rotor holder design includes thrust bearings which increases resilience, in addition to substantially improving the accuracy and performance of the tail performance when utilizing 69 size Tail Blades.

Standard equipment

?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1

Requirements

?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Diameter: 850mm
?Tail Rotor Diameter: 181mm
?Motor Pinion Gear: 11T
?Main Drive Gear: 121T
?Main Drive Pulley-block: 56T
?Tail Own Gear: 15T
?Own Gear Ratio: 11:1:3.73
?Weight(w/o battery): 860gAccessories

?T-REX 470L DOMINATOR Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1