Align T-REX 470LM KIT (w/ Motor and ESC)

Following the release of the T-REX 450L, which introduced an ingenious design and came equipped with high-end electronic devices. Align's most prepared for helicopter release in 2016 the T-REX 470L is born. No matter whether you are a beginner or a professional, the brand name new T-REX 470L will give you the new flying feel once again.

470EFL Main Rotor Head offers superior flight stability and provides a lower CG design to decrease flying resistance while supplying a more stiff and quick rotor head response. To improve the strength and sturdiness of the primary and feathering shaft the 470 primary shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high standard 1.2mm 3K carbon fiber primary frame and a larger body design which increases the size of the battery compartment permitting the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an ingenious adjustable belt guide pulley, supplying a practical way to change the belt stress by releasing or tightening the screw. This screw is utilized to keep ideal belt stress enhancing the life of the belt and lowering preserves expenses. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is equipped with the large external diameter 470MX motor (1800KV) which is extremely efficient supplying superior power, outstanding torque, improved existing draw, and a lower operating temperature which are outstanding enhancements as compared to the 460MX motor.

Extended 380mm primary blades effectively improve the flying stability and power performance. The new crafted airfoil design effectively minimizes turbulence at the end of the primary blades,this saves power usage throughout severe 3D flight. New 69 size tail blades are longer in length and deal superior tail holding performance, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head offers superior flight stability and provides a lower CG design to decrease flying resistance while supplying a more stiff and quick rotor head response. Brand name New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,effectively strengthening the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high efficiency, superior power, outstanding torque, low existing draw, and a low operating temperature. The 470MX is capable of maintaining constant torque and head speed through continuous 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate design with zero slop providing a precise and precise controlled flight.

Brand new CNC metal support plate and brace compare to frame mounting bolt effectively increase the torsional stength of primary frame, under severe 3D maneuver, you can highly feel its solid support from its structure.

Carbon fiber side frame plates are made utilizing a proprietary composite product integration innovation which incorporates the battery mounting rails into the frame. This special use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

Brand new latching battery tray which utilizes integrated mounting rails inside the frames to streamline insertion / elimination of battery while supplying protection for the battery.

Specially designed for T-REX 470 supplying greater currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, severe torque, and improved performance.

Innovative adjustable belt guide pulley, enables a practical way to change the belt stress by releasing or tightening the screw. The screw is utilized to keep ideal belt stress over time.

The One Method Bearing is made utilizing bearing steal and after heat treatment the hardness is HRC50-55. This larger bearing has a greater load bring capacity which minimizes the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The new primary equipment case and all-metal central pulley transmission system is an efficient design to deliver the ultimate performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength. Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

Designed utilizing a proprietary product integration innovation which creates a unique look and enhances the Vertical Stabilizer's stiffness.

The freshly designed dual point supported tail control assembly delivers slop totally free performance while enhancing rudder resolution and precision.

The new tail rotor holder design includes thrust bearings which increases sturdiness, in addition to significantly enhancing the precision and efficiency of the tail performance when utilizing 69 size Tail Blades.

Standard devices

?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1

Requirements

?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Diameter: 850mm
?Tail Rotor Diameter: 181mm
?Motor Pinion Equipment: 11T
?Main Drive Equipment: 121T
?Main Drive Sheave: 56T
?Tail Own Equipment: 15T
?Own Equipment Ratio: 11:1:3.73
?Weight(w/o battery): 860gAccessories

?T-REX 470L BOSS Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1