Align T-REX 470LM Dominator Super Combo

Following the release of the T-REX 450L, which presented an ingenious design and came equipped with high-end electronic equipment. Align's a lot of anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or an expert, the brand name brand-new T-REX 470L will provide you the brand-new flying feel once again.

470EFL Main Rotor Head provides superior flight stability and provides a lower CG design to lower flying resistance while providing a more rigid and quick rotor head reaction. To enhance the strength and sturdiness of the main and feathering shaft the 470 main shaft outer measurement was increased from Ø5mm to Ø6mm, while the feathering shaft outer measurement was increased from Ø4mm to Ø5mm. The 470L has embrace a high basic 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment enabling the use of larger capacity battery. The 470L uses a high efficient belt drive assembly design with an ingenious adjustable belt guide wheel, providing a practical method to adjust the belt stress by releasing or tightening up the screw. This screw is utilized to preserve optimum belt stress improving the life of the belt and lowering maintains expenses. The landing skid is slanted 5 degrees forward to enhance crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is equipped with the large outer size 470MX motor (1800KV) which is extremely efficient providing superior power, excellent torque, improved existing draw, and a lower operating temperature which are excellent enhancements as compared with the 460MX motor. The brand name brand-new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based upon servo specification. The brand-new high-end electronics efficiently enhance flight performance.

Extended 380mm main blades efficiently enhance the flying stability and power efficiency. The brand-new engineered airfoil design efficiently lowers turbulence at the end of the main blades,this saves power usage during extreme 3D flight. New 69 size tail blades are longer in length and offer superior tail holding efficiency, even during requiring 3D flight.

Brand New 470EFL Main Rotor Head provides superior flight stability and provides a lower CG design to lower flying resistance while providing a more rigid and quick rotor head reaction. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft outer measurement increased from Ø4mm to Ø5mm,efficiently enhancing the Main and Feathering Shaft while improving durability.

New 470MX motor features; high effectiveness, superior power, excellent torque, low existing draw, and a low operating temperature. The 470MX is capable of maintaining constant torque and head speed through constant 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate design with absolutely no slop providing an accurate and accurate regulated flight.

Brand brand-new CNC metal reinforcement plate and brace compare to frame mounting bolt efficiently increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its strong reinforcement from its structure.

Carbon fiber side frame plates are manufactured using an exclusive composite material combination technology which incorporates the battery mounting rails into the frame. This distinct use of open spaces within the frame produces a stiff frame and is aesthetically pleasing.

Specifications:
Microbeast PLUS Flybarless System X 1 set
?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1
?DS450M Digital Servo X 3
?DS455M Digital Servo X 1
RH47E01XW
?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Size: 850mm
?Tail Rotor Size: 181mm
?Motor Pinion Gear: 11T
?Main Drive Gear: 121T
?Main Drive Wheel: 56T
?Tail Drive Gear: 15T
?Drive Gear Ratio: 11:1:3.73
?Weight(w/o battery): 860g

Consists of:
?T-REX 470L BOSS Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?DS450M Digital Servo x 3
?DS455M Digital Servo x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1800mAh battery x 1