Align T-REX 470LM Dominator Super Combo

Following the release of the T-REX 450L, which introduced an ingenious design and came geared up with high-end electronic equipment. Align's most expected helicopter release in 2016 the T-REX 470L is born. No matter whether you are a beginner or an expert, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head supplies exceptional flight stability and uses a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the primary and feathering shaft the 470 primary shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high standard 1.2mm 3K carbon fiber primary frame and a larger body design which increases the size of the battery compartment permitting the usage of larger capability battery. The 470L utilizes a high effective belt drive assembly design with an ingenious adjustable belt guide pulley-block, providing a hassle-free method to change the belt tension by releasing or tightening the screw. This screw is utilized to maintain optimal belt tension enhancing the life of the belt and lowering keeps costs. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is geared up with the large external size 470MX motor (1800KV) which is highly effective providing exceptional power, outstanding torque, enhanced existing draw, and a lower operating temperature which are outstanding improvements as compared with the 460MX motor. The brand new DS450 digital cyclic servos and DS455 digital tail servo, support approximately V8.4, high voltage input, enhancing the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC supplies 5.0V to 8.4V which can be set based upon servo spec. The new high-end electronic devices effectively boost flight performance.

Extended 380mm primary blades effectively improve the flying stability and power performance. The new engineered airfoil design effectively minimizes turbulence at the end of the primary blades,this conserves power usage during severe 3D flight. New 69 size tail blades are longer in length and deal exceptional tail holding performance, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head supplies exceptional flight stability and uses a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,effectively enhancing the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high performance, exceptional power, outstanding torque, low existing draw, and a low operating temperature. The 470MX can preserving consistent torque and head speed through continuous 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate design with zero slop providing an accurate and accurate regulated flight.

Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of primary frame, under severe 3D maneuver, you can strongly feel its solid reinforcement from its structure.

Carbon fiber side frame plates are produced utilizing an exclusive composite product combination technology which incorporates the battery mounting rails into the frame. This distinct usage of open areas within the frame produces a rigid frame and is aesthetically pleasing.

Specifications:
Microbeast PLUS Flybarless System X 1 set
?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1
?DS450M Digital Servo X 3
?DS455M Digital Servo X 1
RH47E01XW
?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Size: 850mm
?Tail Rotor Size: 181mm
?Motor Pinion Gear: 11T
?Main Drive Gear: 121T
?Main Drive Wheel: 56T
?Tail Drive Gear: 15T
?Drive Gear Ratio: 11:1:3.73
?Weight(w/o battery): 860g

Consists of:
?T-REX 470L BOSS Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?DS450M Digital Servo x 3
?DS455M Digital Servo x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1800mAh battery x 1