Align T-Rex 450Pro DFC Super Combo

This is the Align T-Rex 450Pro DFC Super Combination. Align has actually paired the T-Rex 450Pro DFC with the upgraded 3GX Programmable Flybarless System, making this one amazing extremely combo.

Align has actually established a few of the most high-performance, high-quality helicopters in the industry. The brand name brand-new Align T-Rex 450 Pro DFC Super Combination has a 400-size airframe and a performance level that's far beyond the equivalent size radiance helicopter.

Align has actually continued to set brand-new requirements in both cost and quality. The brand-new Align T-Rex 450 Pro DFC Super Combination continues with their requirements, which were first established with its predecessor -the Align T-Rex 450. This brand-new version will offer you a huge quantity of control in both precision flying and 3D maneuverability. The brand-new version of the T-Rex 450 incorporates a lot of today's newest ingenious styles that have shown to be dependable and effective in the bigger Align helicopters.

3GX Programmable Flybarless System Features:

• New upgraded 3GX represents an entirely brand-new generation of multi-function flybarless systems. The 3GX will significantly enhance your heli's performance.
• Currently the lightest and smallest flybarless system available on the marketplace.
• 2 ports so you can directly connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
• Based on the 3G FL760 manual setup procedure, the 3GX can be setup in as low as a few minutes. In addition, the 3GX can support all the CCPM swashplate systems that are currently available on the marketplace- including 90, 120, 135, and 140 degree swashplates.
• Graphic illustrated instructions on the computer setup software application advises you through a step by action setup procedure, offering you a fast  and pain-free setup time without leaving out any steps.
• Supports Bluetooth connection- With the much anticipated and quickly to be released Bluetooth connection set, the 3GX can be set (wireless) from a PC.
• Built in Align RCE-G600 governor function, so a external governor isn't needed to reduce electronic wire clutters.
• Custom specifications have been opened up in the 3GX to permit you to fine tune a variety of settings for swashplate and rudder. Settings export function allows custom settings to be shown your friends.
• Utilizes brand name brand-new gyroscope sensors, with the highest requirements when compared with other flybarless systems currently on the marketplace. This allows it to be used under harsher than normal conditions. Its dual axis plus rudder sensing unit significantly improves swashplate and rudder correction precision compared with last generation of 3G.
• Ideal for helicopter of all class from 250 to 800, radiance engine or electrical powered.
• 3GX makes use of 16 bit processor, 4 times faster than the previous generation, together with totally re-written firmware.
• With built in pirouette settlement function, the 3GX has the ability to stabilize your heli on a set point throughout pirouetting maneuvers.
• 3GX's rudder offers consistent rudder feel, even under high speed conditions. This exceptional control feel will permit pilot of all ability levels to experience the best integration in between 3GX and helicopter.
• Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous method point flights as well as return home.

T-Rex 450Pro DFC Functions:

• Geared up with DFC flybarless head assembly, offering you a very low CG style that minimizes wind resistance, offers more direct and exact flight control response and higher leading speed.
• New removable servo mounting block and main shaft block simplifies main shaft and servo maintenance.
• Integrated battery and ESC mounting platform, with adjustable battery position for the most ideal CG position.
• Vertical rudder servo mount style for closer CG, and increases the sportiness of 3D flights.
• New and enhanced frame side plates with dedicated 3GX mounting area simplifies overall aesthetics and wire management.
• New style gyro mounting platform for included length.
• Highly rigid and lightweight carbon side plates.
• New style dual point supported tail control assembly for slop totally free tail, improving on rudder resolution and control precision.
• Unique anti-centripetal force weight tail blade grips to enhance rudder locking effect.
• Equipped with Align's brand name brand-new MX series high performance brushless motor.
• Highly efficient torque tube tail drive style, significantly reduce power loss found on belt owned system.
• Streamlined style canopy.
  

Includes:
One ALign T-Rex 450 PRO DFC Package set
One 3GX Flybarless System
One 325D 3G Carbon blades
One RCE-BL35P 35A Brushless ESC
One 450MX Brushless motor(3400KV)
One DS520 Digital servo
Three DS415M (Metal Gear)Digital servo

Needs:
Receiver(6-channel or more)
Pitch gaugeX1
11.1V THREE Li-Po 2000~2300mAh battery X1
Transmitter (6-channel or more,helicopter system)

Specifications:

3GX Programmable Flybarless System
Running Temperature level: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 450Pro DFC
Length: 640mm
Height: 204mm
Main Rotor Size: 710mm
Tail Rotor Size: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approx. 638g