Align T-Rex 450Pro DFC Super Combo

This is the Align T-Rex 450Pro DFC Super Combination. Align has actually paired the T-Rex 450Pro DFC with the upgraded 3GX Programmable Flybarless System, making this one amazing extremely combo.

Align has actually developed some of the most high-performance, high-quality helicopters in the industry. The brand name brand-new Align T-Rex 450 Pro DFC Super Combination has a 400-size airframe and an efficiency level that's far beyond the comparable size radiance helicopter.

Align has actually continued to set brand-new requirements in both rate and quality. The brand-new Align T-Rex 450 Pro DFC Super Combination continues with their requirements, which were very first developed with its predecessor -the Align T-Rex 450. This brand-new version will offer you a massive amount of control in both accuracy flying and 3D maneuverability. The brand-new version of the T-Rex 450 includes much of today's most recent ingenious designs that have actually shown to be reputable and successful in the bigger Align helicopters.

3GX Programmable Flybarless System Features:

• New upgraded 3GX represents an entirely brand-new generation of multi-function flybarless systems. The 3GX will significantly improve your heli's performance.
• Currently the lightest and tiniest flybarless system offered on the market.
• 2 ports so you can directly connect Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
• Based on the 3G FL760 manual setup process, the 3GX can be setup in as low as a few minutes. Additionally, the 3GX can support all the CCPM swashplate systems that are presently offered on the market- consisting of 90, 120, 135, and 140 degree swashplates.
• Graphic showed instructions on the computer setup software application advises you through an action by action setup process, giving you a fast  and painless setup time without leaving out any steps.
• Supports Bluetooth connectivity- With the much anticipated and quickly to be released Bluetooth connectivity set, the 3GX can be configured (wireless) from a PC.
• Built in Align RCE-G600 governor function, so a external governor isn't needed to minimize electronic wire clutters.
• Custom specifications have actually been opened up in the 3GX to enable you to tweak a variety of settings for swashplate and rudder. Settings export function enables customized settings to be shown your friends.
• Utilizes brand name brand-new gyroscope sensors, with the highest requirements when compared to other flybarless systems presently on the market. This enables it to be used under harsher than typical conditions. Its double axis plus rudder sensing unit significantly enhances swashplate and rudder correction accuracy compared to last generation of 3G.
• Ideal for helicopter of all class from 250 to 800, radiance engine or electrical powered.
• 3GX utilizes 16 bit processor, 4 times faster than the previous generation, together with entirely re-written firmware.
• With integrated in pirouette payment function, the 3GX has the ability to stabilize your heli on a set point throughout pirouetting maneuvers.
• 3GX's rudder provides consistent rudder feel, even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the perfect integration in between 3GX and helicopter.
• Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize, hold position in addition to altitude, and even autonomous method point flights in addition to return home.

T-Rex 450Pro DFC Features:

• Geared up with DFC flybarless head assembly, giving you a very low CG design that lessens wind resistance, provides more direct and accurate flight control reaction and greater leading speed.
• New detachable servo mounting block and primary shaft block simplifies primary shaft and servo maintenance.
• Integrated battery and ESC mounting platform, with adjustable battery position for the most optimal CG position.
• Vertical rudder servo mount design for closer CG, and increases the sportiness of 3D flights.
• New and enhanced frame side plates with dedicated 3GX mounting location simplifies general aesthetic appeals and wire management.
• New design gyro mounting platform for included length.
• Highly rigid and light-weight carbon side plates.
• New design double point supported tail control assembly for slop totally free tail, improving on rudder resolution and control precision.
• Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
• Equipped with Align's brand name brand-new MX series high efficiency brushless motor.
• Highly effective torque tube tail drive design, significantly minimize power loss discovered on belt owned system.
• Streamlined design canopy.
  

Includes:
One ALign T-Rex 450 PRO DFC Kit set
One 3GX Flybarless System
One 325D 3G Carbon blades
One RCE-BL35P 35A Brushless ESC
One 450MX Brushless motor(3400KV)
One DS520 Digital servo
3 DS415M (Metal Equipment)Digital servo

Needs:
Receiver(6-channel or more)
Pitch gaugeX1
11.1V 3S Li-Po 2000~2300mAh battery X1
Transmitter (6-channel or more,helicopter system)

Specs:

3GX Programmable Flybarless System
Operating Temperature level: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 450Pro DFC
Length: 640mm
Height: 204mm
Main Rotor Size: 710mm
Tail Rotor Size: 158mm
Motor Drive Equipment: 12T
Main Drive Equipment: 121T
Autorotation Tail Drive Equipment: 106T
Tail Drive Equipment: 25T
Drive Equipment Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approximate. 638g